Welcome! Please Sign-In
Top Sellers
Bulk Pak Nylon Washers - 1/4", Pack of 100 from FASCO FASTENERS
Bulk Pak Nylon Washers - 1/4", Pack of 100 from FASCO FASTENERS
These washers are white nylon for cushioning.
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
RigTune Pro Digital Rig Tension Gauge from HARKEN
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
Flat Cam Riser, 1"H from HARKEN
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
"D" Shackle, 3/16" Pin Dia., 7/16" Inside Width, 1/2" Inside Length, 2500lb. Breaking Strength from HARKEN
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesn’t require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
Winch Service Kit from HARKEN
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.

from HARKEN, from RONSTAN, SWL from HARKEN, 16 from FASCO FASTENERS

29mm Sheave Diameter Block, Traveler (two 348s) Style, 330lb. SWL from HARKEN Home -> Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 353
Big Bullet Block, Single with Becket, 300lb. SWL, 2.0oz. from HARKEN Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 126
Protective Ring - 4" from NICRO VENTILATION Home -> Ventilation -> Vents -> Exterior Vents
Slips over the deck plate as it protrudes through a Lexan hatch. Not only protects against potential injury, but also adds finish to the hatch installation.
Part No: N10864PR
Gray Medium C-Cleat from RONSTAN Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Carbon Fiber C-Cleats & Accessories
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Part No: RF5010
Yellow Medium C-Cleat from RONSTAN Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Carbon Fiber C-Cleats & Accessories
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Part No: RF5010Y
Blue Medium C-Cleat from RONSTAN Home -> Sailboat -> Cleats & Stoppers->Carbon Fiber C-Cleats & Accessories
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Part No: RF5010B
Pink Medium C-Cleat from RONSTAN Home -> Sailboat -> Cleats & Stoppers->Carbon Fiber C-Cleats & Accessories
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Part No: RF5010
Drain Fitting, 1-1/4" NPT, Straight from AMBASSADOR MARINE Home -> Plumbing -> Freshwater Systems->Stainless Steel Drain Fittings
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
Part No: S00-0104-UP-R
U-Joint and Gimbal Bearing Lube from MERCURY MARINE Home -> Engine Systems -> Engine Lubrication
Mercury Marine 92-802870Q 1 U-Joint and Gimbal Bearing Lubricant.
Part No: 802870Q1
Nylock Nut - 7/16 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Nylock Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 31338B
Ball Mount, Chrome Finish, 2"x2"x10"L, 3 1/4" Drop from FULTON Home -> Trailer & Parts -> Hitches, Winches & Jacks->Removable Receiver Tube Ball Mounts
Removable ball mounts for use with most receivers with 2" x 2" openings. Shank hole size is 1". Available in steel or aluminum. Steel ball mounts are offered with a chromium or black powder coat finish. Mounts meet or exceed V-5 requirements. Removable ball platforms fit in most square receivers. For trailers with a maximum gross trailer weight of 5,000lb.
Part No: 665460
29mm Carbo Clew Block Assembly from HARKEN Home -> Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 371
#8 Dia. Brass Wood Screws, 3/4" Long from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Brass Wood Screws with Slotted Flat Head
Brass Wood Screws with Slotted Flat Head, Package of 100.
Part No: 1794
Series 250 Exhaust Hose, 2-7/8"ID, 3-5/16"OD, 190psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2783
Barrel Nut - 6 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Barrel Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 2930B
25 Replacement Torlon Balls, Fits All Big Boat Cars from HARKEN Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 547
Connector for Extra Extrusion (MKIV Unit 0 Furler) from HARKEN Home -> Sailboat -> Headsail Furling->MKIV Unit 0 Furler Accessories
Connectors and extra extrusions for MKIV Unit 0 Furler.
Part No: 7410.31
Series 29 Utility Block, Single/Becket & Pin, V-Jam, 500lb. SWL, 1.1oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF341
Series 20 Block, Double with 2-Axis Shackle Head/Becket, 770lb. SWL, 1.6oz. from RONSTAN Home -> Sailboat -> Blocks->Series 20 Blocks
Two-stage bearing system with stainless-steel ball bearings handles very high safe working loads. Designed for small diameter, high-tech line on high-performance dinghies and control lines on sport and race boats. Each double and triple block offers a formed loop head and extra shackle for mounting versatility. Sheave: Acetal plastic. Sheave Size: 3/4" (20mm). Line Diameter: 1/4" max. Cheek Material/Finish: Stainless and textured fiber-reinforced Zytel.
Part No: RF20212
40mm Sheave Diameter Block, Cheek Style, 485lb. SWL from HARKEN Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2644
Series 30 Block, Stand-Up, Swivel, 660 SWL, 1.4oz. from RONSTAN Home -> Sailboat -> Blocks -> Blocks->Series 30 Ball-Bearing Mini Blocks
Like Ronstan Series 20 blocks, but with larger (1-3/16") sheave diameter, higher SWL and Acetyl–not stainless steel–bearings. High-Load (HL) blocks feature a Nylatron® sheave suitable for both rope and wire. Sheave: UV-stabilized acetal. Ball Bearings: Two-stage acetal system. Sheave Size: 1-3/16"dia. Line Diameter: 5/16" max. Cheek Material/Finish: Stainless and textured fiber-reinforced Zytel.
Part No: RF30140
Series 30 Orbit Block, Single/Stand Up/Swivel, 661lb. SWL, 1.2oz. from RONSTAN Home -> Sailboat -> Blocks->Series 30 Orbit Blocks™
Their flexible lashing and Dyneema® Link technology mirrors the latest trends in development classes and grand prix ocean racing. The product of meticulous engineering, they deliver the ultimate in strength, weight savings and control. Months of on-water testing by elite sailors pushed the product to their limits. Halyard, vang and backstay applications on boats to 16ft . Control line applications on larger boats . Materials: Sheave: High-compression–strength carbon black Acetal .
Part No: RF35140
Micro Block, Double, 350lb. SWL, 1.5oz. from HARKEN Home -> Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 226
Series 250 Exhaust Hose, 3-1/8"ID, 3-5/8"OD, 175psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3183
HEXBOLT-BZ1/4X.75 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Machine Bolts - Hex Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2258B
Dia 3/8", Thread 16, L-6" Pack of 5 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 5015D
Dia #12, Length 1-3/4" Pack of 100 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Flat Head Slotted - Bulk Packs
Type 18-8 Stainless Steel.
Part No: 299A
Hexbolt - 5/16 x 4 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 30088C
Bronze Frearson (R & P) Flat Head Wood Screws, #8 x 1-3/4", Pack of 50 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Bronze Frearson (R & P) Flat Head Wood Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2193A
Stanchion Mount Base from HARKEN Home -> Sailboat -> Headsail Furling -> Furling Accessories
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion .
Part No: 061
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11