Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
|
from RONSTAN, 1, Gasket from SIERRA, Thermostat from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-3809
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
Replaces: Chris-Craft 16. 50-00204. Mercruiser 27-52364. OMC & Volvo 3853336, 908611, 913274, 914812. For GM 181 (3.
Part No: 18-2946
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX09S
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Premium Navy Prespliced Three-Strand Nylon Dock Lines
Get the same premium docklines in a new color! Unique marine coating provides superior wet abrasion resistance. Professionally spliced 12" eye. Navy.
Part No: 8553-12-00025
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-3966
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Stainless-Steel Cushion Clamps
304 stainless-steel padded clamps are suitable for supporting fuel lines, electrical looms and plumbing. The EDPM insulator is water-, fuel-, oil-, and acid-resistant.
Part No: 403902
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**Thermostat|**Thermostat.
Part No: 18-3537
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Washer-Thrust|**Washer-Thrust.
Part No: 18-0197
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Seal-Oil|**Seal-Oil.
Part No: 18-2093
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->333 Brushing Liquid
Prevents paint from "flashing off" prematurely in hot weatherSlow-drying solvent eases brushing and improves flow with certain paint products. Extends drying time in hot weather.
Part No: Y333/QT
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Thermostat|**Thermostat.
Part No: 18-3543
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 471
|
|
|
|
A key addition to an efficient stand up system, the Drop Strap attaches to the loops on either side of the Braid fighting belt, while the shackles at the other end connect to the D-rings on the Braid fighting harness. Raise or lower the fighting belt to reduce strain and pressure. Increase leverage on the rod's foregrip. Replaces standard 2'' straps.
Part No: 99W 30150
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Ball-Lok Quick-Release Pins
.
Part No: C0375-1065-W
|
|
|
|
Home -> Sailboat -> Blocks->Series 40 Ball Bearing Orbit Blocks™
The newest addition to Ronstans Orbit range of super lightweight, fiber reinforced blocks. Series 40 Ratchet blocks feature 14:1 holding power and a sophisticated cross-hole sheave geometry for superior rope wear performance. The automatic version is ideal for asymmetric spinnakers and other applications where an auto-engaging ratchet is preferred. Ball Bearings: High compression strength Carbon Black Acetal, Stage 2 bearing: Glass fiber reinforced, MoS2 impregnated engineered nylon.
Part No: RF45101
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 457041
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Set Screws - Socket Head - Bulk Packs
SKTSETSCRW-1/4X1/2 FINE.
Part No: 1481
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Finish Washers - Bulk Packs
Type 18-8 stainless steel.
Part No: 6243
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Stainless Steel Drain Fittings
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
Part No: S00-0101-UP-R
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Slotted Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 919B
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->West Marine Brand VHF Accessories
VHF accessories for West Marine Brand VHF Radios. Power cords, chargers, and headsets for the VHF100 and VHF200. Replacement parts for the VHF100 & 200.
Part No: BC50
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> D & Headboard Shackles->Stainless-Steel Swivels
Approx. ShWt .
Part No: RF173
|
|
|
|
Home -> Sailboat -> Blocks->Series 30 Orbit Blocks™
Their flexible lashing and Dyneema® Link technology mirrors the latest trends in development classes and grand prix ocean racing. The product of meticulous engineering, they deliver the ultimate in strength, weight savings and control. Months of on-water testing by elite sailors pushed the product to their limits. Halyard, vang and backstay applications on boats to 16ft . Control line applications on larger boats . Materials: Sheave: High-compression–strength carbon black Acetal .
Part No: RF35100A
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Washington & Oregon Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 18484 POD
|
|
|
|
Print on Demand Nautical Charts Accurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updatesCharts are printed after your order is placed, ensuring that you receive the most up-to-date informationApproved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper chartsDistinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 16085 POD
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Long Island Sound to Cape Cod Canal Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 12365 POD
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Mediterranean France, Spain & Gibraltar Charts
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 53085
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> NOAA Atlantic->Charleston to Cape Hatteras Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 11532 POD
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Washington & Oregon Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 18464 POD
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> NOAA Pacific->Mariana Islands Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 83637 POD
|
|
|