Top Sellers
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
|
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
Motor from SIERRA, Starter from SIERRA, Gearset from SIERRA
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-138-238
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-138-214
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-138-212
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels
Lever Drag control system with preset drag feature. Preset drag feature. New cast control system only available from Avet Reels. (prevention of backlash and as an line out adjustment for live bait fishing). Lightweight and topless. 100% machined, Type 2 anodized, True-One piece frame. 8 stainless steel rubber sealed ball bearings and stainless componets. Stronger design with larger line capacity. Extremely stable Avedrag brake system.
Part No: 3117-0021
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Stator|**Stator.
Part No: 18-5878
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
**Motor-Tilt/Trim|**Motor-Tilt/Trim.
Part No: 18-6786
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
**Motor-Tilt/Trim|**Motor-Tilt/Trim.
Part No: 18-6756
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-6432
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear Set--Forward|**Gear Set--Forward.
Part No: 18-1564
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**U-Joint Assy|**U-Joint Assy.
Part No: 18-9218
|
|
|
|
Home -> Electronics -> Radars->Satellite TV/Phone Antenna Mounts
Designed for arches or cabin tops. Be sure these mounts are attached where other electronic signals will not conflict and they are level.
Part No: PMA-12-M8
|
|
|
|
Home -> Electronics -> Boat Instruments->PowerPods Grand Prix Series 20/40
PowerPods Grand Prix Series 20/40 Swivel Base.
Part No: PP5050
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-6420
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-138-234
|
|
|
|
AC source selector switches provide a safe method of controlling multiple sources of AC power for boats with AC generators, inverters or multiple shore power connections. The rotary switch offers a compact method of preventing two sources of AC power to the same circuit simultaneously. The switch has heavy-duty contacts and positive step cam mechanisms for smooth contact closure. Dimensions: 1. 9" x 1. Rated for 32A at 120V. Other Rotary Selector Switches available by Special Order.
Part No: 9093
|
|
|
|
Home -> Safety -> Life Jackets->The Powerboat™ ANSI-Compliant Flotation Jacket
Stearns® most popular flotation jackets are now ANSI-compliant for even greater visibility. Suitable for bridge work, ferries, environmental, and traffic hazardous areas. Minimum 15-1/2 lb. buoyancy .
Part No: I077O/N-05-ANS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Mix U-1202G Catalyst with U-1201G low-voc green, strontium chromate epoxy primer (sold separately) one hour before thinning and application. U-1201 is an excellent anti-corrosion coating for use over chemically-treated aluminum and properly prepared steel and is also used as a finish primer for aluminum components and marine accessories such as spars, antenna masts and trim.
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Anchor Line->Prespliced Mega Plait Anchor Lines
Mega Plait line is designed to handle use in popular mechanical windlasses without abrading or fraying. It’s made of high-quality premium nylon. Supple, and easy handling, it flakes or coils tighter and uses less space than traditional three-strand nylon rodes, taking up less space in your anchor locker. Extremely abrasion-resistant, snag-resistant and long-lasting for use in popular mechanical windlasses.
Part No: 5070-20-00250
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S60-1
|
|
|
|
Home -> Navigation -> Binoculars & Night Vision->LRM Laser Range Finders
How fast is that other boat going? Find out fast! For sailboat racing, collision avoidance and just plain curiosity, sometimes you need to know just how far off another vessel is and exactly how fast it is going, or maybe you want to know how fast a car or motorcycle is going. These advanced laser range finder systems provide instant distance and speed measurements consistently and accurately. The laser is Class 1 eye safe. 8° field of view. Requires one 9V battery (sold separately).
Part No: LRM1500
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-2500-S
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->TYR20
Big reels for huge strikes and monster fish! These drag reels are tough enough for huge strikes and powerful fighting with 33lb. of max drag and 16. 5lb. of strike drag capacity. Alternating Twin Pawl Anti-Reverse Design technology halts backplay and gives you great touch and power for hooksetting. Oversized power gears, oversized handle shank, metal frame, ratcheting drag lever, Anti-Rust Bearings (ARBs) Gear Material: Brass Material: Diecast aluminum frame, graphite sideplates Gear Ratio 5.
Part No: TYR12II
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables->Vixen Wakeboard Combo
The Vixen bindings provide true wrap-around comfort and support, while the integrated heel kidneys give you just the right amount of heel hold-down. Floating tongue provides a wide range of fit options for this boot! 3-Stage rocker - large flat spot gives the board huge pop off the wake. Molded-in fins - outstanding tracking and stability. Variable beveled edges - helps prolong the life of the deck. Board Length Width Rocker Type Stance Edge Rider Weight Fins Vixen 132 132cm / 51. 16cm / 16.
Part No: 2090195
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables->Combo Wakeboard with Clutch Binding
The Clutch will help any new boarder develop their fundamentals. This board was designed for effortless tracking and great stability. Its 3-stage rocker with a large sweetspot provides added pop off the wake and the oomph to expand your trick list.
Part No: 2090190
|
|
|
|
|
.
Part No: 70724OY
|
|
|
|
Home -> Seating & Covers -> Seating->Ladder Back Chair
Resilient, comfortable seating for long hours at the helm. Built for durability and weather-resistance with high-impact plastic and all-stainless steel hardware for the ultimate corrosion resistance. Heavy-duty 28oz. marine grade vinyl upholstery is mildew- and UV-resistant. High-density foam cushions snap on and off for stowing. The chair is available with arms (SKU 9415183) and no arms (SKU 9415175).
Part No: BM562-3-710
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F8016/1GLUS
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Chain & Wire Kits
Pre-assembled with one length of roller chain and two lengths of wire. The connections between wire and chain are covered in clear shrink plastic to prevent fouling. All roller chain and wire rope are stainless, and the chain end fittings are cotter-pinned for ease of maintenance. Now includes connecting hardware/ tensioning kit.
Part No: 774-2S15B9
|
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables->Combo Wakeboard with Clutch Binding
The Clutch will help any new boarder develop their fundamentals. This board was designed for effortless tracking and great stability. Its 3-stage rocker with a large sweetspot provides added pop off the wake and the oomph to expand your trick list.
Part No: 2090191
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Mooring Whips->BoatGuard Mooring Whips
Finally an economical way to protect your boat. Designed with the same tough standards as the fixed base and premium Mooring whips, the new Whips provide a "Safety Zone" between dock and boat for many types of docking applications. Take care of your ski boat, runabout, center console, or bass boat with this easy to use docking solution.
Part No: 99080
|
|
|
