Top Sellers
Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Six) from GARELICK
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
|
LPG Solenoid 1/4In 12V W/Ftgs from TRIDENT RUBBER
Corrosion-resistant 12V and 24V solenoids with 1/4" female NPT ports. For low-pressure side of regulator. Come with fittings for connection to LPG regulator outlet and supply hose. Each includes: 1/4" male NPT x 3/8" male NPT hex reducing nipple.
|
Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
|
Standard Stainless-Steel Stopper, 1/4"-3/8" Chain, 3-1/8" x 2-3/8" Base from LEWMAR
Works with your anchor roller to take tension off your windlass. Removable pawl flips up when not in use. Standard model handles 1/4" to 3/8" chain and is made of polished stainless steel.
|
Original Bellows Shaft Seal, 1-1/2", Stern Tube: 2" to 2-3/4" from LASDROP SHAFT SEALS
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.
|
Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
|
|
Flex Trim - Black 1/4" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Flex Trim - White 1/4" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Fuel Tank Connector 1/4 NPT Mercury - Male from MOELLER
Mercury 1/4 NPT Brass Male Tank Connector 1998 And Newer Style Engines; Two Prong Clip Style.
|
Mast Base Lead Block, Hi-Load, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
|
PowerBar 600A, 4 Stud Circuits, 3/8" 16-16 Stud Size, 7"L x 2-1/4"H from BLUE SEA SYSTEMS
The highest amperage bus connector available! 3/8"studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel . DC Rating: 600A@48V . AC Rating: 545A@300V . Base Material: Lexan Polycarbonate . Mounting Hardware: Four 1/4" RH screws (not included). Insulating Cover Available: Sold separately (4-stud) . Warranty: Five years.
|
Offshore Cam-Matic Cleat, 1-1/4"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Light springs allow the cleats to open freely, so the teeth do not have to be sharp and your line lasts longer. Use models with aluminum jaws for high loads or when the line will be drawn through the teeth for adjustment. Models #423 and #365 have carbon fiber jaws for lightweight durability. Cam #150 and #365 require two #10 FHMS. Cam #280 requires two 1/4" FHMS. Each ShWt 0.
|
|
1, 1-1, 4" from SEAFIT, Evinrude from SIERRA, O from SIERRA, Yamaha from SIERRA
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1005
|
|
|
Electrical -> Shore Power
Marinco 103RN is a weathproof cover with threaded ring.
Part No: 103RN
|
|
|
Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Stainless Steel Jaw and Jaw Swivels
Drop forged 316 stainless steel, with screw pin on both sides.
Part No: C0156-HD10
|
|
|
Anchor & Docking -> Chain & Mooring
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
|
|
|
Cabin & Galley -> Stoves & Propane System
Assembled LPG Supply Hoses UL-listed high-pressure thermoplastic LPG hoses are leak tested Solid brass fittings(3/8" female swivel flare for each end) 350 psi working pressure 30' supply hose does not include adapters or connectors. Male POL x 1/4" Flare Pigtail Hose Use between regulator and solenoid or Leak Test Adapter and regulator High-pressure hose assembly with solid-brass, soft-nose orifice 20'' long, thermoplastic, UL- and CGA-listed POL and 1/4'' male flare fitting.
|
![Head Gasket Johnson/Evinrude from SIERRA]( "Head Gasket Johnson/Evinrude from SIERRA")
|
|
Engine Systems -> Engine Parts
REPLACES: 320745, 335360 HP Year HP YEAR 150 *1979-91 185 1984-85 155 comm 1984-92 200 1976-83 2500cc 1988 235 1978-79 175 1977-83 * 1991 Models TL, TX, CX, ST, SL only.
Part No: 18-2964
|
|
|
Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Perko Spare Parts
Spare parts and accessories.
Part No: 0493DP799R
|
|
|
Fasteners -> Mechanical Fasteners->Hex Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1322
|
|
|
Paint & Maintenance -> Zinc Anodes
Mercruiser R/MR/Alpha one, Alpha One Generation II, Bravo I, II & III.
Part No: 821631Q1
|
|
|
Recessed fuse contacts, no cover required. Black thermoplastic.
Part No: 46377-6-BP
|
|
|
Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Pan Head - Macro Pacs
Type 18-8 stainless steel.
Part No: 871A
|
|
|
Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM31640KITM
|
|
|
Engine Systems -> Engine Parts->Ignition Tune-Up Kits
Complete kits include cap and rotor, contacts and condenser if required. Tune-up kits have everything that the complete kits have, except for the cap.
Part No: 18-5260D
|
|
|
Anchor & Docking -> Anchors -> River/Lake Anchors->Mushroom Anchors
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
Part No: 508-B
|
|
|
Electrical -> Meters & Distribution -> Low Amperage Distribution->BusBar 150A
The standard marine busbar for consolidating positive or negative wires. Tin-plated copper bus bar with #8-32 terminal screws and two 1/4-20 terminal studs or with four 1/4-20 studs only. DC Rating: 150A@48V . AC Rating: 130A@300V . Base Material: ABS. Insulating Cover Available: Yes; sold separately .
Part No: 2303
|
|
|
Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Plastic Check Valves
For use in installations where an in-line check valve is required.
Part No: LV1215
|
|
|
Ventilation -> Air Conditioning & Cooling->Breathe Easy Air Filters
Breathe Easy Air Filters feature electrostatically charged fibers that attract and retain micro-particles in the air. They have been found to be eight times more effective than ordinary slide-in mesh screen air conditioning filters at capturing airborne micro-particles not visible to the eye. They are easy to install for all types of air conditioners. Selection is simple. Measure the width and height of the evaporator face of your air conditioner and refer to the sizes listed.
Part No: 235000600
|
|
|
Engine Systems -> Engine Parts
Replaces: Mercury/Mariner - 47-95611M, Yamaha - 662-44352-00-00 (6/8 HP).
Part No: 18-3063
|
|
|
Fasteners -> Mechanical Fasteners->Silicon Bronze Ring Shank Nails - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2552
|
![Dia #14, Length 1", Pack of 100 from FASCO FASTENERS](http://images.westmarine.com/thumb/369330_t.jpg "Dia #14, Length 1", Pack of 100 from FASCO FASTENERS")
|
|
Fasteners -> Mechanical Fasteners->Tapping Screws - Pan Head - Square Drive - Bulk Packs
Type 18-8 stainless steel.
Part No: 5412
|
|
|
Engine Systems -> Engine Parts
**Service Kit-WaterPump|**Service Kit-WaterPump.
Part No: 18-3281
|
|
|
Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Full- & Standard-Flow Tailpieces
Offered in full- or standard-flow designs. The cast hex nut facilitates installation. Generous seating area for double clamping.
Part No: FF-1250
|
|
|
Plumbing -> Fittings & Valves->Bronze Couplings
Plumbing fittings.
Part No: 479647
|
|
|
Boats & Motors -> Oars & Paddles->Deluxe Wooden Paddles
Varnished paddles are made from laminated southern hardwood and feature a strong cross-grain design which resists splitting and cracking. The palm grip is specially contoured for comfort and efficient paddling.
Part No: R40
|
|
|
Interior, Flags & Gifts -> Sunshowers & Sunscreen->Dry Lite Towels
The DryLite™ Towel is exactly what you want in a microfiber towel: it’s soft and thirsty, but compact and quick drying. Available in five sizes from hand towel size up to a beach towel size. Ideal for boating, camping or travel. Microfiber with super soft ultra-suede finish. Remarkably absorbent and fast drying. Lightweight & very compact. Machine washable.
Part No: 274
|
|
|
Electronics -> Global Positioning Systems->GPSMAP 72/76 Series Accessories
How do you get from here to there if your GARMIN GPS has an MCX connector but your GARMIN external antenna has a BNC connector? Bridge the difference with this MCX to BNC adapter.
Part No: 010-10121-00
|
|
|
Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 350/355/368/369 Fire-Acol™ Fuel Hose
**3/8 FIRE ACOL X 10|**3/8 FIRE ACOL X 10.
Part No: 116-368-0383
|
|
|
Engine Systems -> Engine Parts
Oil Filter / Nissan: 9.
Part No: 18-79111
|
|
|
|
Cabin & Galley -> Stoves & Propane System
Assembled LPG Supply Hoses UL-listed high-pressure thermoplastic LPG hoses are leak tested Solid brass fittings(3/8" female swivel flare for each end) 350 psi working pressure 30' supply hose does not include adapters or connectors. Male POL x 1/4" Flare Pigtail Hose Use between regulator and solenoid or Leak Test Adapter and regulator High-pressure hose assembly with solid-brass, soft-nose orifice 20'' long, thermoplastic, UL- and CGA-listed POL and 1/4'' male flare fitting.
|
|
|
Trailer & Parts -> Trailer Parts & Carriers
The flange at the bottom of these protectors prevents over insertion and the special indicator at the top ensures when the savers are full. A coiled stainless steel spring coupled with a neoprene seal keeps grease under constant pressure when filled. Molded polycarbonate construction provides exceptional impact resistance and eliminates problems caused by corrosion, including rust! Sold in pairs. Made in U. S. A. Mfr.
Part No: 000632
|
|
