Top Sellers
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
from HARKEN, 3675826 from SIERRA, Starter from SIERRA
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC A-Series Main + Branch Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8485
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Mainsail Covers
Protect your mainsail from damaging UV radiation with our top-quality marine acrylic canvas covers. A clever extendable panel, attached to the cover with hook-and-loop tape, lets you extend the cover length up to 2' to cover the end of your boom. We’ve sized the girth measurement generously so the cover will fit stiff, new sails, and those that weren’t flaked properly. Lined to protect against most winch chafe. Made from durable, acrylic canvas . May be extended by up to 2'L, to cover boom.
Part No: H4892196
|
|
|
|
Home -> Electronics -> Global Positioning Systems -> Handheld GPS->eTrex Vista HCx Handheld GPS with Color Display and Expandable Memory
Featuring a built-in basemap, it accepts preprogrammed microSD cards (sold separately) for adding optional maps on the go, including MapSource® Topo and Inland Lakes, BlueChart® marine cartography, or City Navigator™ street maps. and average ascent/descent rates, and min/max elevation. Add to that a bright, full-color TFT display and long, 17-hour battery life, and you’ve got a great companion for your next outdoor or boating adventure. Unit dimensions: 4.
Part No: 010-00630-01
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Storm Surge Anchor System
System allows you to place three anchors on a swivel and up to three lines to your boat for extra security during heavy weather or storm surge. The boat can swivel on the anchors without getting anchor chains and lines twisted around each other. Comes complete with galvanized bridal plates, shackles and a swivel. Also available with a safety shackle that incorporates nuts and cotter pins for security, eliminating the need for wire seizing. Boat Length: 25' - 60'. Safe Working Load: 8,000lb.
Part No: 33060S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Boomkickers
Boomkicker supports the boom and eliminates topping lift hassles Patented, lightweight flexing spring provides a more effective sail shape in light air and a near-constant force for higher vang efficiency. Installs easily inside the vang but independently of it, where it is out of the way. Two coated fiberglass spring rods provide the force necessary to support the boom and mainsail. Fittings, fasteners, drill and tap are included. Opens leech by lifting boom for better light-air sail shape.
Part No: K1500
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Sur-Moor T3C Mooring Buoys
Moor securely with these highly visible buoys Hard-skin buoys feature a reflective blue band to increase visibility. The mooring chain passes through a PVC tube in the center of these buoys and must be secured to a 4" galvanized O-Ring (Model 201105) or T3C Mooring Collar using an appropriately-sized anchor shackle, all sold separately. Buoyancy is provided by closed-cell foam protected by a polyethylene shell . Three-year warranty .
Part No: 46374
|
|
|
|
Home -> Fishing -> Rods -> Spinning Rods->Tuna Stick Rods
The ideal rod for the stand-up angler. These rods, with their trademark taper and incredibly rugged components are handcrafted from Penn Superglass blanks and fitted with AFTCO Roller Guides. The parabolic taper gives you big leverage muscle and the fast-tip sections give you flex and touch for landing the biggest of the "chickens of the sea. " Type: Standup Tuna. Blank: Superglass. Guides: Fuji. Reel Seat: Fuji. Grip: Foam. Butt: Aluminum.
Part No: 0009-1146
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Urethane, (Commercial/Industrial Only)
Marine Urethane - Commercial/Industrial Only Marine Urethane is a two component (3:1 mix ratio) marine grade acrylic polyurethane finish. High gloss and excellent color retention. Fast drying and good leveling characteristics. Very good resistance to chemicals, cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 4001-4GB
|
|
|
|
Home -> Safety -> Life Jackets
Designed by Mustang's Innovation & Technology experts and built for serious users with exclusive technology, Mustang Survival has pioneered the standards for inflatable work vests. With a comfortable and low-profile fit, the Mustang Survival Inflatable Work Vest offers enhanced mobility and reduced heat stress, allowing crews and professionals to work more efficiently throughout the day. Its 35lb buoyancy rating also means they'll have the added safety of extra flotation when they need it.
Part No: MD3188
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1940
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Destackers
Destackers for use with KVH DIRECTV HDTV.
Part No: 19-0410
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->U-Joints
U-Joints connect the drive shaft from the engine to the drive unit and allow the drive to trim and tilt. Most U-joints come with grease fittings and should be lubricated annually. Style 18-2097 comes with a synthetic lubricant and does not need annual service.
Part No: 18-2339
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Permanent Remote-Control Spotlights
These low profile, compact and powerful lights can be operated from virtually anywhere on your boat for the ultimate versatility. Available in dashmount, wireless remote control or combination models. All wireless remote controls include a fast/slow speed rotation option. Golight's CR5 Pentabeam technology produces 400,000cp with a focused all-purpose beam pattern. White. Peak Beam Intensity: 400,000cp . Lens Diameter: 3. 6"H x 5. 9"W . Case Material: UV-stabilized ASA .
Part No: 2067
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Outboard Hose Kits (two hoses per kit)
Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately.
Part No: HO5728
|
|
|
|
.
Part No: 62245
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Teleflex Premier Series Gauges
When illuminated, light piping distributes light evenly across dial and into the staff of the pointer Excellent, "halo-less", night readability of the dial Four-gauge set includes speedometer, tachometer, fuel gauge and voltmeter Six-gauge set includes speedometer, tachometer, fuel gauge, voltmeter, and oil gauge .
Part No: 62714P
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Spotlights
This 180,000 candlepower remote-controlled searchlight is easy to operate and install. Ocular design provides 18º up and 45º down pitch for enhanced visibility. Dual lamp design provides redundancy for safety. Includes Point Pad style remote control with flush and surface mount. Electronics located in the water-resistant light head for protection. Beam Strength: 180,000cp . Case Material: UV ASA plastic . Case Dimensions: 7. 5" x 8. 75" x 7. 5" .
Part No: 1946
|
|
|
|
Home -> Electronics -> Boat Instruments->UnCut Integrated NavPod On Power Mount Stanchion Kit
Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. Watertight Silicone Seal Keeps rain and salt water spray off electrical connections on the back of electronics. Concealed Wiring No loose wires are exposed to corrosion and UV damage.
Part No: GP1050
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
Deep bucket styling, updates many pilot seat applications. Sized to match the scale and style of pontoons and runabouts . Roto-cast shell frame, marine grade vinyl, firm resilient foam . Specifications W: 23. 5” (60cm), D: 22. 5” (57cm), H: 19” (48cm) .
Part No: 49000-01:02
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Mainsail Covers
Protect your mainsail from damaging UV radiation with our top-quality marine acrylic canvas covers. A clever extendable panel, attached to the cover with hook-and-loop tape, lets you extend the cover length up to 2' to cover the end of your boom. We’ve sized the girth measurement generously so the cover will fit stiff, new sails, and those that weren’t flaked properly. Lined to protect against most winch chafe. Made from durable, acrylic canvas. May be extended by up to 2'L, to cover boom.
Part No: H114183
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Windward Sheeting Traveler Cars
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751. Block Type: Uses 2740 Control Blocks. Cleat Type: Modified 150 Cam-Matic. Shackle: Pivoting shackle. Cam: Leeward cleat opens automatically. Purchase: 2:1/3:1.
Part No: 2744
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Ladder Platforms
With an underwater platform at the bottom, these innovative ladders enable swimmers and divers to easily exit the water and climb back aboard. Features 304 stainless steel construction and triple-walled tubing, making these ladders some of the sturdiest available. when used with Small Backing Plates, Model 9545252, sold separately below. Material: Triple walled, stainless-steel tubing, multi-strand stainless steel wire supports for platform, 1" thick plastic stair and platform tread .
Part No: LP-6-16-H1
|
|
|
|
Home -> Anchor & Docking -> Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: P030
|
|
|
|
Home -> Sailboat -> Blocks->ESP Deck Organizers
Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave, use the same holes and simply drill another hole to mount the longer organizer. Organizers are asymmetrical to keep them short, and may be double stacked to contain several lines in a small area. A spacer at one end keeps the outer line on the sheave. Sheave: Long-glass engineered plastic . Ball Bearings: Contained-axle sleeve bearing, carbon-black ball bearings . : 1/2" max. .
Part No: 6104
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-6410
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC Branch A-Series Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8480
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70909
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->AC Source Selection Rotary Switch Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8365
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Trim Tab Accessories
Installation and replacement parts for Bennett Trim Tabs.
Part No: V351HPU1-SV
|
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70907
|
|
|
