Top Sellers
|
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
|
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
|
from CANADA METALS, 1, 1-1, 38" from SHURFLO, 42 from WEEKENDER®
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM832598Z
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chain And Rode Pipes
Hinged cover. Accepts line up to 1/2". Material: Chrome-plated brass . Flange: 2-3/4"Dia. I. D. : 1. 5"Dia. .
Part No: C3808-0002
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SV7
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Round Body Connectors
A convenient way to disconnect the leads to a 12V or 24V appliance. Polarized brass contacts assure correct mating of circuits. Rated for 10 amps and can accept up to a 12 gauge marine grade stranded wire. Corrosion-resistant terminals.
Part No: M-115-BP
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->3300 Cable System Parts
High-quality replacement parts and accessories for engine controls.
Part No: CA27373P
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Canada Metal - Zinc Prop Nut Anodes
The Martyr two-part prop-nut anode provides reliable corrosion protection for your valuable outdrive, outboards and propellers. Complete sets include the bronze fastener. Secured with a locking pin and special nylon patch hex fastener. Streamlined prop-nut anode is easy to install.
Part No: CMPNZD
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4063-16-00015
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Pump Motor Replacement Cartridges
Replacement motor cartridges for Rule Cartridge Bilge and Livewell/Aerator pumps.
Part No: 25DR
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Replacement Bulbs for Aqua Lights Underwater Lights
**AquaLight Bulb 175W Halide W|**AquaLight Bulb 175W Halide W.
Part No: AL50BH24V
|
|
|
|
Home -> Casual Apparel -> Shirts->Men's Graphic Tees
Been there? Done that? Express your kicked-back, relaxed attitude in these classic tees. Whether you long to be fishing, lounging or manning the grill, they’re sure to conjure images of afternoons to aspire to. Sizes M-XXL.
Part No: NAVY-XL
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906070
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
An easy solution to storing boats out of the wayMakes it easy to mount boats to a wall for convenient, out-of-the-way storage. Features two 2" wide polypropylene straps and two zinc-plated 2. 5" lag bolts for mounting to studs. The quick-release buckles allow boats to be clipped in and out quickly. Each strap supports 100lb. . One pair hangs one kayak.
Part No: 025915
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->Oil Pan Adaptor
A complete assortment of oil pan adaptors for GROCO’s U-Lube systems.
Part No: OPD-11
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->Oil Pan Adaptor
A complete assortment of oil pan adaptors for GROCO’s U-Lube systems.
Part No: OPD-13
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Mini Anchor Buddy Mooring Line for PWS
Mini Anchor Buddy for your PWC Rope-covered bungee cord stretches from 7' to 21'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Part No: MB-RB
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Utility Pans
Use these versatile pans on the stove or in the oven for casseroles, soups, stews or pasta. Space-saving, nesting pans are constructed of heavy tri-metal carbon steel for uniform cooking and excellent heat retention. Nordic Ware non-stick interiors mean easy cleanup. Rugged chrome, steel-riveted side handles will never loosen. Durable porcelain exteriors . Dishwasher-safe.
Part No: 11865
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support
These rust-resistant, galvanized steel brackets make it easy to mount your fenders. Mount them directly on the trailer’s frame, then mount the fenders on them. For fenders that fit 8"'–12" wheels. Two brackets required per fender. Sold in pairs.
Part No: 86260
|
|
|
|
Home -> Engine Systems -> Control Systems->4300 Cable System Parts
4300 Cable System Parts.
Part No: CA28018P
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Test Meters
Tests AC and DC voltage, DC amps, Resistance, Transistor Gain. 13-Position rotary dial with color-coded analog scale. Fuse and diode protected. Includes zero ohm adjustment dial and calibration screw. Battery, test leads and spare fuse included. Range Setting: Manual . Display Type: Analog . Maximum DC Voltage: 500V . DC Voltage Resolution: 0. 2V . Maximum AC Voltage: 500V .
Part No: 702095
|
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348982
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: CG-KFD-ISM4
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->SHURflo Bilge Pumps
Built for demanding marine use, pumps feature permanent magnet motors, ABS plastic (380–1000gph models) or nylon housings (1500 and 2000gph models) and high-strength nylon impellers. Motors are water cooled for extended life. 380–1000gph models include 3' tinned wire leads. 1500 and 2000gph models come with 6' leads. 1500 and 2000gph models install easily with included swivel base. Type: Submersible centrifugal bilge pump .
Part No: 355-010-10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1204
|
|
|
|
Home -> Casual Apparel -> Shirts->Women's Star Spangled Short-Sleeve Tee
100% cotton jersey with back graphic. Guy Harvey “signature” on left front. Pink or Blue.
Part No: PINK-S
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas
Tek-Lite quick-drying nylon with a mesh flow-through inner liner, drawstring waist, and contrasting inside waistband. Three-pocket trunk has a hidden inside security pocket. Sizes S (28" waist), M (30-32" waist), L (34-36" waist), XL (38-40" waist), and XXL (42-44" waist). Imported.
Part No: -
|
|
|
|
Home -> Fishing -> Fishing Accessories->SpiderWire Ultracast 125 YD Spools, Fresh Water
With Spiderwire®, Nothing Get's Away! Spiderwire® Ultracast™ is the BEST braided fishing line ever made PERIOD! Ultracast™ outcasts, and outlasts all the competitors. Unlike the other braids, Ultracast® requires no break-in period. It is limp and ready-to-fish right out of the box.
Part No: 1124843
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Merc Alpha Plate (Zinc / Aluminum)
Merc Alpha Plate Anode.
Part No: 821630-A
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VRC
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: N-203-C
|
|
|
|
Home -> Casual Apparel -> Shorts->Men's Trader Shorts
Easy care fabric! These 65% polyester/35% cotton twill shorts have a back elastic waistband for a truly comfortable fit. Feature deep front cargo pockets and a secured back pocket. Men's Sizes: 32 – 42. Colors: Sand, Navy, Black, Chambray. 6" inseam.
Part No: BLACK-42
|
|
|
