Top Sellers
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
|
from HARKEN, from RONSTAN, 1-1, 4-1, Gallon from STERLING
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70913
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->A-Series Toggle Branch Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8376
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->Tri-Lens Radar Reflector - 12"W x 6"H
Defense industry technology brought affordably to recreational boating! High-quality reflectors let traffic in the area know where you are. Rated by Practical Sailor (Aug. 2001) as the #1 radar reflectors. Rugged, fully-sealed UV-resistant ABS housing.
Part No: RA-4210-1
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC A-Series Main + Branch Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8488
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1528 GAL
|
|
|
|
null.
Part No: 70721
|
|
|
|
Home -> Fishing -> Fishing Accessories->Baitwells
These baitwells are durable and rugged - choose the shape and size to fit your needs! Parts and accessories sold separately.
Part No: SF-27
|
|
|
|
Home -> Electronics -> Boat Instruments->Flexible Shaft Coupling
The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. The flexible disc is machined from a resilient and durable polyurethane.
Part No: 910-044
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
Part No: BP3740
|
|
|
|
.
Part No: 72722
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-3073 GAL
|
|
|
|
Home -> Safety -> Life Jackets->Integrity™ Bomber Jacket
Designed with Mustang AirSoft™ foam to keep you safe and warm in the event of accidental water immersion, the Integrity delivers traditional hypothermia and flotation protection and has deluxe features like fleece-lined front pockets, underarm ventilation to keep you cool and a relaxed, roomy fit for maximum mobility. Water-resistant Comfort Cuffs™ can be tightened. Water-resistant urethane coated zips. Imported. USCG Type: III . Buoyancy: 16lb. . Shell Fabric: Ripstop 420 Denier nylon .
Part No: MJ6224RD/CR-3XL
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1926
|
|
|
|
|
Home -> Safety -> Life Jackets
Designed with Mustang AirSoft™ foam to keep you safe and warm in the event of accidental water immersion, the Integrity delivers traditional hypothermia and flotation protection and has deluxe features like fleece-lined front pockets, underarm ventilation to keep you cool and a relaxed, roomy fit for maximum mobility. Water-resistant Comfort Cuffs™ can be tightened. Water-resistant urethane coated zips. Imported. USCG Type: III . Buoyancy: 16lb. . Shell Fabric: Ripstop 420 Denier nylon .
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->CH Series Premium Engine Controls
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.
Part No: CH7500-200010
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Circulating Pumps
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
Part No: 18830-1020
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps
Jabsco Flexible Impeller Pumps Corrosion-resistant bronze pumps driven by an external power source (usually the engine) are ideal for engine cooling, washdown, circulation and many general purpose onboard or dockside applications. The shafts are installed with permanently lubricated ball bearings for long life in heavy-duty service.
Part No: 777-9001
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->120V AC Branch A-Series Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8478
|
|
|
|
Home -> Sailboat -> Blocks->Series 60 & 75 Orbit Blocks™
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
Part No: RF79108
|
|
|
|
Home -> Sailboat -> Blocks->75mm Black Magic® AirBlocks®
75mm Black Magic AirBlocks feature Torlon roller bearings and carbon black balls for strength and reduced wear. The unique center cage separates rollers for less friction, and sideload ball bearings are protected by sculpted aluminum sideplates. Dissimilar metals are isolated to minimize corrosion. Sheave: 6061-T6 Hardkote anodized aluminum . Sheave Size: 3" (75mm) except 1975 Spriddle fiddle block—3" and 2-1/4" (75mm and 57mm). Line Dia: 9/16" (14mm) max.
Part No: 1969
|
|
|
|
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
Part No: 332002
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-3
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-212
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-4
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 12-6S
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R7
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear-Reverse|**Gear-Reverse.
Part No: 18-1566
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-412
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Halyard Pad Eyes
Halyard Pad Eyes.
Part No: 29904054
|
|
|
