Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
from TAYLOR, Gasket from SIERRA, Hose from SIERRA, Coupler from SIERRA
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Gas Lift Support Accessories.
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 22 Navigation Lights
Standard 10W festoon bulbs provide illumination. 5" hardwire leads. For powerboats to 12m. Case Material: Glass-reinforced polycarbonate . Mounting Hardware: Two screws and gasket included . Volts: 12V . Draw: 0. 83A. Replacement Bulb: Model 297376 . Replacement Lens: Not available .
Part No: 22040-7
|
|
|
|
Home -> Engine Systems -> Engine Parts->Thermostat Kits
Thermostats made from corrosion-resistant stainless steel and brass. Kits include gasket(s) necessary for installation.
Part No: 18-3672D
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Sight Reduction Tables
Their tabular data, being purely mathematical results, never go out of date. The latitudes listed for the Volumes work for either northern or southern hemisphere. Because of the high price and spotty availabliity of the Government editions, these are reprinted as Commercial Editions from official Government electronic files. They are economical, and sized at 90% of the originals. They have soft instead of hard covers and their smaller size of 8. 5 x 11 inches is easier to carry and store.
Part No: 5909CE
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Economy Pedestals
Black powder coated for long lasting finish. Reinforced welded joints for exceptional durability. Standard 5" 1/4" hole pattern. Recommended Usage: Freshwater use . Pedestal Material/Finish: Powder coated steel . Pedestal Dimensions: 3" dia. . Base Dimensions: 6 7/8" x 6 7/8" . Mounting Hardware: Four screw holes, screws sold separately.
Part No: 90720
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Sight Reduction Tables
Their tabular data, being purely mathematical results, never go out of date. The latitudes listed for the Volumes work for either northern or southern hemisphere. Because of the high price and spotty availabliity of the Government editions, these are reprinted as Commercial Editions from official Government electronic files. They are economical, and sized at 90% of the originals. They have soft instead of hard covers and their smaller size of 8. 5 x 11 inches is easier to carry and store.
Part No: 5903CE
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Sur-Moor™ T3C™ Mooring Collars
Hot dip galvanized steel collar protects the T3C buoy from anchor chain wear, prolonging the life of the buoy.
Part No: 33025
|
|
|
|
Home -> Engine Systems -> Engine Parts->Distributor Caps
No tune-up is complete without a quality distributor cap. Many sizes available! Sierra caps are injection molded glass filled polyester with a high luster finish. Material retains high dielectric strength under elevated temperatures. Our caps are molded so perfect, roundness and fit are assured.
Part No: 18-5396
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Oval Head Square Drive - Bulk Packs
Type 18-8 stainless steel.
Part No: 5444
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Gas Lift Support Accessories
Gas Lift Support Accessories.
Part No: 1858
|
|
|
|
Home -> Engine Systems -> Engine Parts
**V-Belt|**V-Belt.
Part No: 18-15430
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Euro Strap Hinges
Type 304 electro-polished stainless steel. Drilled and countersunk for #8 screws (sold separately).
Part No: H23-2720-1W
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Ladder Standoffs
Aluminum standoffs with cushioned tips fit traction-molded poly step to support ladder against hull without marring. Sold in pairs.
Part No: 99000:01
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Coupler-WaterPump|**Coupler-WaterPump.
Part No: 18-3175
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Gaskets
Specific to each model, these gaskets are made to fit with precision. View Applications Chart - or -.
Part No: 18-0604
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Highly polished chrome plated zinc alloy. Recessed center. . Dimensions: 1 3/4" x 1 3/8" . Requires four #6 fasteners .
Part No: 0841DP0CHR
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60464
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60826
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Tapping Screws - Flat Head Square Drive - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 5336
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 199
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Transom Fittings
Transom gudgeons and pintles.
Part No: 18.12
|
|
|
|
Home -> Engine Systems -> Engine Parts
Removes and installs hinge pins from all Mercury Marine drive units.
Part No: 18-9861
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-ValveCover (2)|**Gasket-ValveCover (2).
Part No: 18-0464-9
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**Hose-Molded|**Hose-Molded.
Part No: 18-70956
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 200 Exhaust/Water Hose (No Wire)
Premium fabric-reinforced marine hose for use in marine water and wet-exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy-duty discharge lines and straight marine wet-exhaust connections.
Part No: 116-200-3003
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Ring Set|**Ring Set.
Part No: 18-39540
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-Prop Wrench|**Tool-Prop Wrench.
Part No: 18-4459D
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
**Power Relay-Trim|**Power Relay-Trim.
Part No: 18-5704D
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Ring Shank Nails - Bulk Packs
Type 316 stainless steel.
Part No: 33112A
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4060-16-00025
|
|
|