Top Sellers
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
|
Flo-Master Centrifugal Pump Service Kit from GROCO
Groco Flo-Master Centrifugal Pump Top-of-the-line pump for baitwell circulation, hot/cold water circulation, diesel transfer, shower pumpout or low-pressure washdown. Ignition-protected motor has a #316 stainless steel shaft for extra long life. Not self-priming, so a flooded inlet is required . Not submersible . 17 GPM at 0' . Ports: 3/4" NPT inlet; garden hose or 1/2" NPT outlet . Draw: 5. 5A at 12V DC .
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Euro-Style Rocker Switch Control from BENNETT MARINE
Featuring a sleek, waterproof, contemporary design, the Euro-Style Control installs easily with a standard 2 1/2" hole sawDisplay face measures 2 3/4" x 2 3/4"Five year warranty.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
1-1, from HARKEN, from RONSTAN, 4-1, 4" from LASDROP SHAFT SEALS
|
|
Home -> Electrical -> Meters & Distribution->120V AC A-Series Main + Branch Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8488
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70907
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1926
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Trim Tab Accessories
Installation and replacement parts for Bennett Trim Tabs.
Part No: V351HPU1-SV
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->AC Source Selection Rotary Switch Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8365
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->Tri-Lens Radar Reflector - 12"W x 6"H
Defense industry technology brought affordably to recreational boating! High-quality reflectors let traffic in the area know where you are. Rated by Practical Sailor (Aug. 2001) as the #1 radar reflectors. Rugged, fully-sealed UV-resistant ABS housing.
Part No: RA-4210-1
|
|
|
|
Home -> Safety -> Life Jackets
Designed with Mustang AirSoft™ foam to keep you safe and warm in the event of accidental water immersion, the Integrity delivers traditional hypothermia and flotation protection and has deluxe features like fleece-lined front pockets, underarm ventilation to keep you cool and a relaxed, roomy fit for maximum mobility. Water-resistant Comfort Cuffs™ can be tightened. Water-resistant urethane coated zips. Imported. USCG Type: III . Buoyancy: 16lb. . Shell Fabric: Ripstop 420 Denier nylon .
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Manual Bilge Pumps
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
Part No: BP3740
|
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70913
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps
Jabsco Flexible Impeller Pumps Corrosion-resistant bronze pumps driven by an external power source (usually the engine) are ideal for engine cooling, washdown, circulation and many general purpose onboard or dockside applications. The shafts are installed with permanently lubricated ball bearings for long life in heavy-duty service.
Part No: 777-9001
|
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70909
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Water Circulating Pumps
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
Part No: 18830-1020
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1176 GAL
|
|
|
|
Home -> Electronics -> Boat Instruments->Flexible Shaft Coupling
The R & D Flexible Coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's drivetrain. The unit will reduce vibration, compensate for some misalignment, isolate the shaft and absorb shock loads. The flexible disc is machined from a resilient and durable polyurethane.
Part No: 910-044
|
|
|
|
Home -> Electrical -> Meters & Distribution->120V AC Branch A-Series Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8478
|
|
|
|
Home -> Sailboat -> Blocks->Series 60 & 75 Orbit Blocks™
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
Part No: RF79108
|
|
|
|
Home -> Sailboat -> Blocks->75mm Black Magic® AirBlocks®
75mm Black Magic AirBlocks feature Torlon roller bearings and carbon black balls for strength and reduced wear. The unique center cage separates rollers for less friction, and sideload ball bearings are protected by sculpted aluminum sideplates. Dissimilar metals are isolated to minimize corrosion. Sheave: 6061-T6 Hardkote anodized aluminum . Sheave Size: 3" (75mm) except 1975 Spriddle fiddle block—3" and 2-1/4" (75mm and 57mm). Line Dia: 9/16" (14mm) max.
Part No: 1969
|
|
|
|
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
Part No: 332002
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-3
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-4
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-212
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 12-6S
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear-Reverse|**Gear-Reverse.
Part No: 18-1566
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-412
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R7
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Halyard Pad Eyes
Halyard Pad Eyes.
Part No: 29904054
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-238
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Shorepower Chargers->2000 SP Series Electronic Chargers with Battery Type Selector Switch
Ignition protected, and the 40A model includes automatic temperature regulation. Restores up to three banks simultaneously. Allows selection of charging cycles and voltages for lead-acid, AGM, or gel batteries. Other features include the ability to act as a power supply, easy-to-read DC ammeter, corrosion-resistant components and housing and heavy-duty heat sink design. Runs cool and quiet, no RFI/EMI interference. All models meet FCC Class B requirements. Dimensions: 10A, 15A & 20A—3.
Part No: 93-12152SP-A
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line->Premium Prespliced Three-Strand Anchor Lines
High-quality anchor line handles dynamic shock loadsReplace your aging or worn-out anchor rode with stronger, more durable West Marine Premium Three-Strand Nylon line. This high-quality anchor line is designed to handle the dynamic shock loads caused by boat motion and is treated for maximum abrasion-resistance. It’s made with high-quality premium nylon using a uniform construction process and a marine coating that creates an extremely abrasion-resistant, snag-resistant and long-lasting line.
Part No: 8560-20-00300
|
|
|
