|
|
Electrical -> Meters & Distribution -> Distribution Panels->120V A-Series Source Selection Toggle Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
Part No: 8459
|
|
|
Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Urethane, (Commercial/Industrial Only)
Marine Urethane - Commercial/Industrial Only Marine Urethane is a two component (3:1 mix ratio) marine grade acrylic polyurethane finish. High gloss and excellent color retention. Fast drying and good leveling characteristics. Very good resistance to chemicals, cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 4012-4GB
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74204OB
|
|
|
|
Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Urethane, (Commercial/Industrial Only)
Marine Urethane - Commercial/Industrial Only Marine Urethane is a two component (3:1 mix ratio) marine grade acrylic polyurethane finish. High gloss and excellent color retention. Fast drying and good leveling characteristics. Very good resistance to chemicals, cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 4021-4GB
|
|
|
Anchor & Docking -> Fenders & Docking->Oil-Free D-Icer™
The first affordable oil-free de-icers The new oil-free motors are more energy efficient and save money when used for aeration or de-icing. It is a powerful submersible motor-driven water circulation unit that prevents ice formation during winter months by continuously propelling warmer subsurface water up to the surface. The unique one-piece design of the shroud prevents large debris from being sucked through and damaging the propeller, a major cause of failure in other ice prevention devices.
Part No: 6208D
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 1000M
|
|
|
Anchor & Docking -> Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-37
|
|
|
Trailer & Parts->Wireless Remote Control 12V DC Trailer Winches
RC30 TRAILER WINCH, W/REMOTE.
Part No: P55950
|
|
|
Plumbing -> Fittings & Valves->Bronze Full-Flow Safety Seacocks
With NPT-threaded side port for permanent installation of an in-line ball valve or other threaded component. Enables engine to function as a bilge pump in an emergency. Handle may be relocated to either side of the valve body. 316 stainless-steel ball and stem.
Part No: SBV-2000-P
|
|
|
Engine Systems -> Engine Parts->Water Circulating Pumps
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
Part No: 5850-0001
|
|
|
Cordage -> Anchor Line & Dock Line->Stainless Steel Rub Rail
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
Part No: S11-467SP12B
|
|
|
Plumbing -> Fittings & Valves->Seacock/Strainer Combination
Incorporates full flow, ball-type seacock and top-quality strainer into a single unit. Features ball valve with stainless stem and full flow ball. Filter basket and spin-off strainer cover allow easy access to filter basket.
Part No: BVS-1000
|
|
|
Pont Boat SST 22ft -24ftx102in|Pont Boat SST 22ft -24ftx102in.
Part No: 70308
|
|
|
Safety -> PLBs, EPIRBs, Life Rafts, Survival->Liferaft Cradles
Cradles are an important part of liferaft safety. They make it easy to mount your liferaft on deck, where it's easily accessible in an emergency. All of our cradles accept hydrostatic releases, which we highly recommend for added safety. A hydrostatic release deploys the raft and inflates it automatically when the release comes in contact with the water. Cradles are constructed of 1" (25mm) tube diameter 316 stainless steel. They are designed to be mounted horizontally on deck .
Part No: 40446
|
|
|
Seating & Covers -> Seating
Great looking and easy to maintain--just hose it down once in a while. Ladder-back styling with molded armrests. Thick, removable cushions on the seat and arms make long waits for the fish a lot more comfortable. Swiveling spider and slider, can adjust it fore and aft. 15'' anodized aluminum pedestal with 9'' diameter base.
Part No: 7200-01
|
|
|
|
Engine Systems -> Propellers & Drive Trains
**Gear Set|**Gear Set.
Part No: 18-2200
|
|
|
Electrical -> Exterior & Navigation Lighting->Series 32 LED Navigation Lights
LED Navigation Lights for big boats Use on power or sail vessels up to 65'7" (20m). Two nautical mile visibility. Patented prism lens technology provides the highest quality LED illumination in the industry. Energy-efficient LED technology significantly reduces power draw compared to incandescent lights. ABYC, USCG, IMO, CE and RINA certified. Case Material: Polycarbonate . Mounting Hardware: Sold separately . Volts: Operates on 12V or 24V with no modification needed . Draw: 0.
Part No: 32607-7
|
|
|
Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Add this kit to reduce condensing unit amp draw. It uses sea water to lower the operating temperature. The kit includes everything needed to plumb your system: 12V DC water pump, mounting bracket and switch . 5' of 5/8'' hose and 10' of 3/8'' hose . Hose clamps . Seawater strainer . 5/8'' plastic thru-hull discharge . Wiring diagram and mounting screws .
Part No: C8350
|
|
|
Fishing -> Reels -> Conventional Reels->Trinidad Reels
Solid, one-piece graphite frame. Large drag surface and precise lever drag. Three ball bearings deliver a smooth, predictable response. 1166917 390/12lb Capacity Yards/Test 3BB 16. 4 oz. .
Part No: TN-40
|
|
|
Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-134-314
|
|
|
Boats & Motors -> Kayaks & Canoes->High-Performance River Kayaks XK1 and XK2
The XK1 has pronounced rocker, but can easily be paddled in a straight line in calm water. The XK2 is a dual purpose boat with moderate rocker that is a roomy, handsome and trim touring kayak with plenty of room for gear. Both include crossstitch PVC High Pressure floors, inflating to 7psi, which add rigidity. Hulls are composite SevyTex polyester/PVC sandwich with puncture-resisting technology. Dropstitch High Pressure floors inflate to a rigid deck . Self bailing cockpits for rough water.
Part No: U231CMB-00-000
|
|
|
Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->V-Bottom Polyethylene Fuel Tanks
These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting.
Part No: X90-2166
|
|
|
Anchor & Docking -> Fenders & Docking->De-Icers
Protect your vessel against the damaging effects of iceKasco De-Icers circulate subsurface water (which is warmed by geothermal heat) to the surface to melt ice and prevent its formation. This helps to protect your boat and dock from lifting damage due to "ice jacking" and the shearing and crushing damage caused by ice expansion. Many factors affect the size of the open water area. In general, the 1/2hp model keeps a 50' dia. area from freezing while the 3/4hp model keeps a 75' dia.
Part No: 2400D050
|
|
|
|
Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-6425
|
|
|
Sailboat -> Blocks
High-load blocks suitable for large offshore boats. Bolted construction permits easy disassembly for maintenance. Blocks feature investment-cast-stainless universal head and forged D shackle. Fairlead features spring-loaded track pin. Stainless cheeks. Aluminum sheave for rope or wire. Sheave: Aluminum . Ball Bearings: Nomex® Teflon® high-impact glass-fiber . Sheave Size: 2-3/8" (60mm) . Line Dia: 9/16" max. .
|
|
|
Electrical -> Batteries & Accessories -> Sealed Batteries->SlimLine Compressed AGM Batteries
Mastervolt batteries utilize AGM (Absorbed Glass Mat) separators and VRLA (valve-regulated lead acid) technology to provide maintenance-free, completely sealed battery power. Great for starting, service and deep-cycle applications, without leaks, spills and the hazards of gassing with unsealed batteries. Special one-way valves prevent pressure buildup if they're overcharged. Excellent high-current-discharge behavior, accepts higher charging currents, and multiple batteries are easily linkable.
Part No: 63001500
|
|
|
Plumbing -> Marine Sanitation
Sizes are available to fit any rigid holding tank (36" maximum depth, 1" inch increments), and since waste is macerated BEFORE it leaves the tank, smaller hose and overboard seacock (3/4") may be used in the discharge line.
Part No: 155-6110-12
|
![3" Pole, 10' Tall, w/RM3-3AB from PSS SHAFT SEAL](http://images.westmarine.com/thumb/10700615.jpg "3" Pole, 10' Tall, w/RM3-3AB from PSS SHAFT SEAL")
|
|
Electronics -> Boat Instruments->Self Leveling Radar Mounts
Self leveling radar mounts guarantee your radar will stay level with the horizon as the boat heels or rolls.
Part No: RM-3TUBE-10
|
|
|
|
Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-134-312
|
|
|
Electronics -> Boat Instruments -> Instrument Mounts
Mount up to three sailing instruments on your mastMount up to three sailing instruments in your mast. Fits popular instruments like Raymarine ST60, Tacktick mn100 series or other 110mm instruments.
Part No: MP320
|
