Top Sellers
|
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Johnson/Evinrude Outboard, 1971-1989, 1-2Cyl., 1.25-60HP from SELOC PUBLICATIONS
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. 25-60 h. , 1 and 2 cylinders from 1971-1989. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
|
1-1, 2" from LASDROP SHAFT SEALS, 3" from LASDROP SHAFT SEALS
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Heavy-Duty Tetragonal Race Marks
Race marks are portable and towable, yet store compactly when not in use.
Part No: RM-2
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Lag Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2374B
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->TS Series Socket Ends
Aluminum fitting automatically locks onto the mast toggle pin.
Part No: 309028
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-314
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear-Reverse|**Gear-Reverse.
Part No: 18-2409
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear Set|**Gear Set.
Part No: 18-2203
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-334
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Oil Extractor|**Tool-Oil Extractor.
Part No: 18-52104
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-2
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
**Pump-Intake Retroft Atlantes|**Pump-Intake Retroft Atlantes.
Part No: ADPRFK12
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-134
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SwitchBox|**SwitchBox.
Part No: 18-5790
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-278
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-214
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SwitchBox|**SwitchBox.
Part No: 18-5791
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-3
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: Johnson - 10-24232-1, Indmar - 685001, Pleasurecraft - RA057024 For Impeller Repair Kit use 18-3089.
Part No: 18-3587
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-312
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Original Bellows Shaft Seal
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.
Part No: BR138VI
|
|
|
|
|
**STARTER/PG260 CW W/GM 6. 0L. |**STARTER/PG260 CW W/GM 6.
Part No: 18-6443
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Ocean Series Hatches
Well-engineered hatches with CE-certified quality materials and construction. Flat base or 1'' flange base (pictured)Silver anodized aluminum finish3-year warranty. Flat base cutout sizes:Ocean 10 - 10" x 10". Ocean 30 - 12 5/8"W x 17 3/4"L. Ocean 40 - 16 3/8" x 163/8". Ocean 60 - 19 3/4" x 19 3/4". Ocean 70 - 24 1/2" x 24 1/2". Flange base cutout sizesOcean 10 - 10 3/16" x 10 3/16".
Part No: 39610050
|
|
|
|
Home -> Safety -> Life Jackets->Integrity™ Bomber Jacket
Designed with Mustang AirSoft™ foam to keep you safe and warm in the event of accidental water immersion, the Integrity delivers traditional hypothermia and flotation protection and has deluxe features like fleece-lined front pockets, underarm ventilation to keep you cool and a relaxed, roomy fit for maximum mobility. Water-resistant Comfort Cuffs™ can be tightened. Water-resistant urethane coated zips. Imported. USCG Type: III . Buoyancy: 16lb. . Shell Fabric: Ripstop 420 Denier nylon .
Part No: MJ6224-RD/CR-L
|
|
|
|
|
Home -> Safety -> Life Jackets->Integrity™ Bomber Jacket
Designed with Mustang AirSoft™ foam to keep you safe and warm in the event of accidental water immersion, the Integrity delivers traditional hypothermia and flotation protection and has deluxe features like fleece-lined front pockets, underarm ventilation to keep you cool and a relaxed, roomy fit for maximum mobility. Water-resistant Comfort Cuffs™ can be tightened. Water-resistant urethane coated zips. Imported. USCG Type: III . Buoyancy: 16lb. . Shell Fabric: Ripstop 420 Denier nylon .
Part No: MJ6224RD/CR 2XL
|
|
|
|
Home -> Engine Systems -> Engine Parts->Outboard Starters
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
Part No: 18-6282
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Roller Shade Screen
The new Roller Shade and Screen, is a tough multi-functional hatch accessory, which features an integral black-out screen and fly screen. The Roller Shade Screen will enhance Lewmar's most popular hatch sizes from the current Low and Medium profile ranges. The components offer versatile fitting options such as installing the trim and cassette roller as an integral part to an existing hatch or adding the cassette roller at a later date.
Part No: 367770252
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Alternators
Sierra offers a complete line of alternators. Marine alternators must be ignition protected to prevent explosions. Sierra alternators meet USCG Standards and International Standards as required in the European Community. Applications: WEST ITEM # SIERRA# REPLACES OE Part# 207268 18-5950 Mercruiser 69729. 207276 18-5951 Mercruiser 78403A2, 78477& 92497A3; OMC 982364, 983424, 983836, 985466 & 986008; Pleasurecraft RA097002, RA097003, RA097006. 5327234 18-5954 Chrysler Inboard 3527501.
Part No: 18-6261
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #2 Spray Converter - (Professional Application Only)
Standard converter for use in spray application of Awlgrip LPU topside enamels. Mixed in a 1:1 ratio.
Part No: OG3010/1GLUS
|
|
|
|
Home -> Engine Systems -> Engine Parts->PWC Starters
High-performance OEM replacement starters.
Part No: 18-6296
|
|
|
|
Home -> Electrical -> Chargers & Inverters
Offering superior quality sine wave output, the Xantrex Sine Wave Inverter XS400 (part#806-0400) is designed specifically to power entertainment systems in boats and recreational vehicles. The Xantrex XS400 supplies up to 400 watts of continuous power and with a surge rating of 800 watts, it can power complete entertainment systems including two 27” televisions. The inverter comes standard with dual AC outlets and AC hardwire connections that increase installation options and safety.
Part No: 806-0400
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Instrument Multipods
Display your instruments in an easily accessible and attractive Lewmar Instrument Pod. Our comprehensive range of pods is designed to complement Lewmar pedestals. The pods are available as either retrofit accessories or as a complete assembly, and can house most sizes of yachting instruments, radars and chartplotters. Each one comes with fitting instructions and fasteners for easy, drill-and-tap installation. Available for 12" and 9-1⁄2" center guardrails.
Part No: 89400200
|
|
|
