Welcome! Please Sign-In
Top Sellers
Seafari 170 Mini Watermaker from HRO SYSTEMS
Seafari 170 Mini Watermaker from HRO SYSTEMS
Gain the luxury of high quality in a smaller capacity watermaker. The HRO Seafari 170 contains the most advanced features, equipment and benefits available on any reverse osmosis watermaker of its size. The Seafari 170 is the most cost effective and dependable way to solve your fresh water needs. Enjoy drinking water with no worries. Produces 7 U. S. Gallons per hour, 170 U. S. Rated Perfomance/Product Water Produced: ±15% at 820 PSIG/58 BAR, 77ºF/25ºC & 35,000PPM TDS typical sea water.
Chromed Zamak Cowl Vent from ATTWOOD
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Fuel Filter Cartridge from SIERRA
Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
Multi Meter DVA Tester from SIERRA
Multi Meter DVA Tester from SIERRA
Replaces mercury 91-99750A1. Tests electrical and ignition systems.

5, 5" from HRO SYSTEMS, Busbar from SIERRA, gask from SIERRA

180lb. Stainless-Steel Plow Anchor, 70' to 80' Boat Length from MANSON Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP180
176lb. Stainless-Steel Ray Anchor, 70' to 90' Boat Length from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY80
Adirondack on Bone Diner Mug from LIFE IS GOOD Home -> Cabin & Galley -> Appliances & Cookware->Diner Mugs
Diner Mug The Life is good® Diner Mug is the same old fashioned, heavy duty ceramic model made famous in American diners in the early 1900's. 3.
Part No: 10789
19gpm Voyager Seafari SFM Watermaker, 118lb., 8.6" x 15.5" x 31.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFM 450-1 V
29gpm Cruiser Seafari SFM Watermaker, 125lb., 8.6" x 15.5" x 41.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFM 700-1 C
I. 2-9/16"L x 3/4"W Eye Strap, 5/8" Fairlead Width, 2-3/8" Hole Centers, Two 5/16" RHMS Fasteners from RONSTAN Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: RF1056
29gpm Basic Seafari SFM Watermaker, 125lb., 8.6" x 15.5" x 41.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFM 700-1 B
550lb. Galvanized-Steel Kedge Anchor, 100' to 140' Boat Length from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D250
18gpm Cruiser Seafari SFC Watermaker, 118lb., 18" x 15.5" x 31.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFC 450-1 C
165lb. Stainless-Steel Kedge Anchor, 55' to 70' Boat Length from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: SSD75
29gpm Basic Seafari SFC Watermaker, 125lb., 18" x 15.5" x 41.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFC 700-1 B
29gpm Voyager Seafari SFC Watermaker, 125lb., 18" x 15.5" x 41.5" from HRO SYSTEMS Home -> Plumbing -> Freshwater Systems->HRO Seafari SFM & SFC AC Watermakers
Between the compact, modular design of the SFM, and the self-contained, larger-boat capacity of the SFC, you’re bound to find a Seafari watermaker that’s perfect for your boat. Each system includes a 17' controller cable. Cruiser package includes all the Basic’s features plus a charcoal filter and freshwater flush. The Voyager includes all the Basic’s features plus a charcoal filter, freshwater flush, ultra violet sterilizer, bronze sea strainer, oil water separator and commercial pre-filter.
Part No: SFC 700-1 V
14"L Natural Nylon Cable Tie 25-Pack from ANCOR MARINE Home -> Electrical -> Switches, Fuses & Accessories->Standard Cable Tie Multi-Packs
Black cable ties have UV inhibitors added for extended protection and longer life.
Part No: 351182
Busbar from SIERRA Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution
**BusBar|**BusBar.
Part No: FS46150
Dinghy/Spring Stop from SCHAEFER Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Rudder is removed by depressing end of stop 1/2" x 4" .
Part No: 82-01
Kayak Bilge Buddy Bailing Sponge from SEATTLE SPORTS Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
Bail out the kayak with this thirsty spongeOur bailing sponge goes where bailing buckets and scoops can't reach.
Part No: 055906
High-Performance Dry Lubricant, 6oz. from TEAM MCLUBE Home -> Sailboat -> Traveler, Tracks & Vang->Sailkote Dry Lubricants
"Makes Laser outhauls actually work. Folks use McLube for the most bizarre range of applications, and it works great on sail tracks, travelers and most of the moving parts on a boat. Reduces friction, abrasion, drag, and water absorption on all treated surfaces. Use on mast track, traveler cars and blocks to reduce friction, even under load. Dries quickly & bonds tightly to any surface . Use on sails to repel water and dirt . Use on hulls to reduce drag and waterline deposits.
Part No: SAILKOTE 6OZ
5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS Home -> Paint & Maintenance -> Caulking & Adhesives -> Adhesives, Glue & Tape->5200 Polyurethane Adhesive/Sealant
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
Part No: 05206
Polymer - White, 6"x 12"x1/4" from WEST MARINE Home -> Paint & Maintenance -> Epoxy & Fiberglass->Starboard Poly-Sheets Building Material
Sheet-Acrylic Wh 1/4x6x12|Sheet-Acrylic Wh 1/4x6x12.
Part No: P10-2506WHA121W
Series C Anode only - 3/4 from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Canada Metal - Zinc Prop Nut Anodes
The Martyr two-part prop-nut anode provides reliable corrosion protection for your valuable outdrive, outboards and propellers. Complete sets include the bronze fastener. Secured with a locking pin and special nylon patch hex fastener. Streamlined prop-nut anode is easy to install.
Part No: CMPNZC
Boatyard Coveralls from BUFFALO Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety
Three-layered construction makes this medium-weight, polypropylene suit highly breathable and the preferred choice in warmer climates. For all boatyard and maintenance environments. Zippered front, elastic wrists, ankles and hood.
Part No: 68534
Snorkel Gear Bag from U.S. DIVERS Home -> Watersports -> Skindiving Gear
Stow your mask, snorkel and fins in this convenient and durable mesh carry bag. Black/Blue.
Part No: 255950
Storm Safety Whistle from WEST MARINE Home -> Safety -> Flares & Signaling Devices
Sounds a powerful blast! The loudest whistle you can buy, even if it’s drenched. Special self-draining chambers quickly purge water so it can sound a blast many times louder than U. S. Military whistles.
Part No: 101-ORANGE
Amber from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Economy Stud Mount Sidemarker/Clearance Lights
Combination marker light and reflector mount easily with a single stud. Not recommended for submersible applications. Mounting hardware included. .
Part No: 01-4698-73
Soft Handle Tongs from FARBERWEAR Home -> Cabin & Galley -> Appliances & Cookware
Soft, ergonomically-designed handles and stainless steel construction let you wield this tool easily without a buildup of heat.
Part No: 84101-10
Shaftseal from SIERRA Home -> Engine Systems -> Engine Parts
**Seal-Shift Shaft|**Seal-Shift Shaft.
Part No: 18-8347
6-2 Gauge Duplex Wire, Sold per Foot from ANCOR MARINE Home -> Electrical -> Electrical Wire -> Duplex Wire->Duplex Wire by the Foot
White jacket over a black and a red conductor. Wire Type: Duplex . Construction: Tinned Copper . Conductors: One Black, One Red . Color of Exterior Insulation: White .
Part No: 120710
Twist Eyelet with Four-Prong Base and Washer, 4 Sets from WEST MARINE PRODUCTS Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Canvas Fasteners
Items with screw-hole bases do not include screws.
Part No: MP7254W
Mini-UHF male to SMB Male from DIGITAL ANTENNA Home -> Electronics -> Antennas, Mounts, Cable->Adapters
Quality adapters for use with Digital Antenna’s PowerMax™ product line and marine antennas.
Part No: DA947
Cover/gask from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
|**Cover and Gasket Assy.
Part No: 18-0993
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12