Top Sellers
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Tab Assembly from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.
|
|
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Tiller Tamer from DAVIS INSTRUMENTS
Smooth, adjustable control of tiller movement, for short periods of "self-steering. " Particularly useful when changing sails, motoring, etc. on short-handed boats.
|
Queaz-Away Bands from DAVIS INSTRUMENTS
Comfortable, elastic, acupressure wrist bands exert a gentle pressure on wrist points helping many people avoid the discomfort of rough seas or bumpy travel. Safe and easy to use—just slip them on over your wrists and position them for enjoyable travel. Long-lasting fabric is comfortable and washable. Carry case included. One size fits all.
|
No Spill Fuel Saver from DAVIS INSTRUMENTS
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
|
from SEADOG, Replacement J-Base for Windex 10 Sport from DAVIS INSTRUMENTS
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
890
900
910
920
930
940
950
960
970
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,200
1,260
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 62B
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Made of stamped 304 stainless steel. Useful as a lifting eye or in mooring applications. 3-3/16"L x 1-15/16"W; hole centers 2-9/16"L x 1-5/16"W. Ring ID: 1-3/4".
Part No: 089613
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->myChart™ Boating Charts of the Chesapeake Bay
Waterproof, pocket-sized nautical charts are based on official NOAA charts. For the central and northern Chesapeake Bay, Delaware/Maryland/Virginia shore, Delaware Bay and New Jersey coast.
Part No: MC30601
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts->Old Guys Rule Coffee Mugs
Old Guys Rule coffee mugs.
Part No: 12011
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1343
|
|
|
|
Home -> Engine Systems -> Engine Parts->Replacement Fuel Water Separator Elements
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
Part No: 18-7930
|
|
|
|
Home -> Sailboat -> Rigging Products
An economical all-purpose rigging knife An essential onboard tool, our Rigging Knife is constructed of corrosion-resistant stainless steel with a Delrin® handle. Its molded to fit your hand and features a quick-cut serrated blade and safety blade lock. Blade: Sheepsfoot . Bolster Material: Delrin® . Edge Type: Varies . Marlinspike: No . Shackle Opener: No . Locking Blade: Yes . Lanyard: Belt clip . Overall Length: Open: 7", Closed: 4" .
Part No: WMKNI
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->Communications Caddy
Compact, easy-to-mount organizer keeps communication devices safe and within easy reach. Small enough to fit near the helm of the smallest boat. Holds most handheld VHF and FRS radios. Mounts either on the back or on the bottom using the two large Super Suction cups, included. Mount it where you need it. , stow it away when you don't. Can also be mounted permanently with screws or marine grade adhesive strips. Molded from commercial grade marine resins. 4. 5"H x 3. 5"W x 2.
Part No: 2135-1
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Seal-Oil|**Seal-Oil.
Part No: 18-0537
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Gaskets
Specific to each model, these gaskets are made to fit with precision. View Applications Chart - or -.
Part No: 18-2941-9
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Inflatable Repair Products
Keep your Sevylor inflatable boat or water sports toy performing like new after being damaged. Air Seal Kit- a no-patch liquid plastic- repairs pinhole leaks in 5 minutes. Repair Kit includes two tubes of PVC glue and three 7" PVC patches for fast field repairs. Seam Seal Kit is a professional kit for mending splits, holes, cuts or worn areas. Repairs are permanent after curing for 24 hours.
Part No: U052KIT-00-000
|
|
|
|
Home -> Cordage -> Rigging Products->Everything Wrap
These innovative elastic straps are just the thing for securing sails, sheets and more. A hook-and-loop fastening system eliminates metal or plastic parts that break over time.
Part No: 20303
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Foot-long stainless skewers are flame-resistant and reusableMake grilling kabobs easy! Set of four 12" stainless-steel skewers are easy to clean, rust and flame resistant and are dishwasher safe. 12 inches long.
Part No: 84107-10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyebolts & U Bolts->Eye Bolts
Machined from 304 stainless steel.
Part No: 080483
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
Guy Havey Redfish Trailor Hitch Cover.
Part No: 380-Y044
|
|
|
|
Home -> Electronics -> Boat Instruments->NMEA 2000 Cables & Accessories
NMEA 2000 Cables & Accessories.
Part No: 010-11080-00
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Rod Holder Mounting Brackets
Adapt the Striker Grip and Baitcaster Holders to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round & 1” square rails. Flush Deck Mount includes rain cover. Adapt the Striker Grip and Caster Grip to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round and 1” square rails.
Part No: 241WEST-BK
|
|
|
|
Home -> Electrical -> Flashlights & Batteries
Dual power modes make this a versatile lantern. Plug it into any standard wall outlet using an AC adaptor (not included) to use at home. Or install 4 size "D" batteries (not included) to make the light completely portable. Great for on the boat, camping, power outages and much more. NOTE: To insure proper operation of your lantern, please make sure that all batteries are inserted with the button (+) side upward, and ensure that the batteries are firmly inserted into the battery hub.
Part No: LL-12
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3110
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 2537
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses
Rotating tip makes makes adjusting the spray pattern a cinchFeatures an adjustable tip that varies the spray pattern from jet to a fan pattern, so you can direct the spray right where you need it. Impact resistant body with soft, insulated grip. Instant on/off. Finger-friendly spray adjustment tip.
Part No: WN700U
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->Swivel Belt Clips
ICOM Swivel Belt clips.
Part No: MB-87
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 2410
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps->Pump Gasket Kits
Jabsco gaskets & gasket kits.
Part No: 1126-0000
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs
Waterproof and Tear Resistant! GPS compatible with Marina listings, Lake structure and Road network.
Part No: 330
|
|
|
|
Home -> Safety -> Flares & Signaling Devices -> Horns & Whistles->Portable Supersound Signal Horn
Just the touch of a button produces a blast that can be heard a half-mile over land and a mile over water. 100% ozone safe. 4 1/2" tall. Type: Portable, push-button . Maximum Decibels: 112dB .
Part No: SH3R
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Antenna Mounts->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 81002A
|
|
|
|
Home -> Clothing Accessories -> Bags->Dry Sacks
A less expensive and less bulky alternative to traditional dry bags. You can squash these into spots ordinary heavy dry bags wont go. Fits into little corners of a sea kayak or dingy. Not intended for situations where dry sack will be submerged under water. Much lighter weight and more packable than traditional boating dry bags . A lot less expensive than other dry bags on the market . Made from a high performance waterproof fabric . Fully taped sealed seams .
Part No: 162
|
|
|
|
Home -> Cordage -> Rigging Products->Replacement Parts for Windex Wind Indicators
Use these replacement parts for all Windex Wind Indicators.
Part No: 3125
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**Housing-WaterPump|**Housing-WaterPump.
Part No: 18-3363
|
|
|