Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.

Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.

Lateral Starboard Clamcleat, 1/4"–3/8" Rope Dia., 3/16"H x 2"W x 2-7/8"L, 1/4" Fasteners from CLAMCLEAT
.