Top Sellers
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H3100
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H1800
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H1500
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H960
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Danforth Hi-Tensile Anchors
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
Part No: 3H500
|
|
|