Top Sellers
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
|
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.
|
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-2
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-1-3/4
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-1-1/2
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-1-1/4
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-1
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP-3/4
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP 1/2
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP 1/4
|
|
|