Welcome! Please Sign-In
Top Sellers
RigTune Pro Digital Rig Tension Gauge from HARKEN
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
Chafe Tape from 3M PRODUCTS
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
Stainless-Steel Rigging Knife, Straight Edge from WEST MARINE
Stainless-Steel Rigging Knife, Straight Edge from WEST MARINE
Tackle onboard cutting tasks with ease An essential onboard tool, our Rigging Knife is constructed of corrosion-resistant stainless steel with a Delrin® handle. It’s molded to fit your hand and features a quick-cut serrated blade and safety blade lock. Blade: Sheepsfoot . Blade Length: 3" . Bolster Material: Delrin® . Edge Type: Varies . Marlinspike: No . Shackle Opener: No . Locking Blade: Yes . Overall Length: Open: 7", Closed: 4" .
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.

Home -> Cordage -> Rigging Products

1" Cam Buckle from BAINBRIDGE Home -> Cordage -> Rigging Products
This easily-adjusted buckle accepts a loop around one end. Acetal.
Part No: PA079BK/4
Sailmaker's Wax from BAINBRIDGE INTL Home -> Cordage -> Rigging Products
The finest beeswax—great for lubricating sail track as well as stitching.
Part No: PC040
Mast Hoop Sail Slides from BAINBRIDGE INTL Home -> Cordage -> Rigging Products
Most commonly used with Sunfish, Sailfish, Vikings or other lateen rigged boats.
Part No: PA029/4
Emergency Shroud Kit from COLLIGO MARINE Home -> Cordage -> Rigging Products
Temporary replacement for up to ¼" wire stays or shrouds. Easily stowable, light and will not corrode. Just splice on one Line Terminator™ to the desired shroud length and lash both ends on with the provided lashing line. Kit contains: 1 unspliced, Line Terminator™, 55' 7 mm, 15,000lb breaking strength Dyneema 12-strand line (Dynex Dux) with a terminator spliced on one end. 20' of lashing line for lashing both ends. 6" piece of chafe protection for spreader ends.
Part No: CSS1000
Straight Titanium Bracket Set from COLLIGO MARINE Home -> Cordage -> Rigging Products
Corrosion-free, these lightweight titanium brackets are designed for connecting Terminators to blocks or brackets. Holes are 1/2" and can be drilled to 5/8 if needed. 10,000lb. safe working load. Weight: 4oz.
Part No: CSS53
Symmetric Titanium Bracket Set from COLLIGO MARINE Home -> Cordage -> Rigging Products
Corrosion free, these lightweight titanium brackets are designed for connecting Terminators to mastheads and chainplates for applications like backstays. Holes are 1/2-inch and can be drilled to 5/8 if needed. 10,000lb. safe working load. Weight: 4oz.
Part No: CSS52
Railfast® Mounting Boss from FORESPAR Home -> Cordage -> Rigging Products
The Railfast® mounting boss consists of the rail clamp assembly and a cover piece with a flat surface, all secured by a single bolt. Mount fender baskets, running lights, solar panels, barbecues, etc.
Part No: 156031
Sailboat Labels from FORESPAR Home -> Cordage -> Rigging Products
Help your crew learn the ropes with these labels Label cleats and winches for organization and safety.
Part No: 100014
Premium Bosun’s Chair from HARKEN Home -> Cordage -> Rigging Products
A strong and well designed chair, made in the USA with high-strength webbing, ballistic nylon construction and an extra wide padded seat for comfort. Low attachment point allows for maximum height when you’re working at the masthead. Adjustable back support, wide-mouth pockets and a D-ring for heavy tools or parts on each side.
Part No: 2234
Backstay Insulators/Antennas from RONSTAN Home -> Cordage -> Rigging Products
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
Stainless Mast Step from RONSTAN Home -> Cordage -> Rigging Products
Going aloft? Take it one step at a time! Rugged, low-windage steps. Snag-free design won’t catch halyards. 316 stainless, with diamond patterned non-slip tread. These should be spaced 18-24" apart, staggered right and left except underneath spreaders and at the masthead. Weight 3oz each.
Part No: RF6092
Microloc Turnbuckle Body from RONSTAN Home -> Cordage -> Rigging Products
Machined from high quality, corrosion resistant grade 316 Stainless Steel The smallest All-Stainless Steel Turnbuckle available For cable assemblies 1/8"–1/4" in diameter Suitible for cable run lengths up to 50' in length. Solution for use in railing applications where tensioning is required but space is premium.
Part No: RF3200P04
Stay Adjuster from RWO Home -> Cordage -> Rigging Products
Stay Adjusters allow wire rigging systems to be altered by means of a clevis pin. All models constructed from stainless steel strip with different sizes and spacings. 4" Long. 5mm Pin.
Part No: R4390
Lash-It Twine from SAMSON ROPE Home -> Cordage -> Rigging Products
Designed to meet the various strength, stretch, knot-holding and wear requirements of integrated trawl net sections or seine net designs. Made from HMPE fiber, this twine yields the highest strength, lightest weight, lowest stretch and longest wear life available. The proprietary urethane coating, Samthane, adds to the twine's wear life, ensures the knot holding capability of the twine, and gives the twine its distinctive gray color. 75mm Length Put-Up(ft): 600 Weight (lb. ) per Put-Up: 1.
Part No: 811017701850
Stanchion Top Cap from SCHAEFER Home -> Cordage -> Rigging Products
Stanchion Top Cap, 1" diameter.
Part No: 45-116
Stainless-Steel Shock Cord Hooks from SEAFIT Home -> Cordage -> Rigging Products
Stainless steel with rubber coated tips.
Sail Lashes from STARBRITE Home -> Cordage -> Rigging Products
Polyester elastic cord for maximum durability and UV-resistance. Swivel end fitting has stainless steel stops.
Bungee with Adjust-a-Hook and Click Lock Ends from STARBRITE Home -> Cordage -> Rigging Products
5/16" x 48" Polyester elastic cord for maximum durability and UV-resistance. Patented Adjust-A-Hook ends allow for quick and easy length adjustment. Patented Click Lock ends allow hook to be closed for maximum grip and safety.
Part No: 066048
Universal Bungee with Plastic Coated Hook Ends from STARBRITE Home -> Cordage -> Rigging Products
Natural rubber core covered with polyethylene braid is rot proof, UV-resistant and long-wearing plastic coated steel hooks.
Part No: 068048
1 x 19 Highly Polished 304 Stainless-Steel Wire Rope from SUNCOR Home -> Cordage -> Rigging Products
Stainless steel rigging wire is strong, stiff and economical The proven standard for standing rigging. Stiff, one-strand cable is made of 19 solid wires twisted together.
1 x 19 Highly Polished 304 Stainless-Steel Wire Rope from SUNCOR Home -> Cordage -> Rigging Products
Stainless steel rigging wire is strong, stiff and economical The proven standard for standing rigging. Stiff, one-strand cable is made of 19 solid wires twisted together.
Hogring Pliers from TAYLOR Home -> Cordage -> Rigging Products
Making your own bungee cords? You'll need these pliers. Make your own bungee cords with the help of these specialized pliers, to grip hogrings (clinching rings) from 3/16" to 1/2" diameter. Spring loaded handle holds ring until clamped on.
Part No: 1046
Line Hanger & Organizer from TAYLOR Home -> Cordage -> Rigging Products
Organize your lines and keep them ready for use. Simply snap one end around the coil of line and snap the other around a rail, lifeline, etc.
Part No: 1006
Marlin Spike from WEST MARINE Home -> Cordage -> Rigging Products
Push button locks secure the blade or marlinspike in the open position ensuring safe use. The stainless steel blade is 50/50 combo of straight and serrated edge, great for cutting rope either natural or synthetic. The glass-reinforced Zytel handle is impervious to salt water, ensuring durability and a long life on the high seas. Blade: Drop point . Edge Type: Straight and serrated . Blade Material: Stainless steel . Handle Material/Finish: Black glass-reinforced Zytel . Overall Length: 7.
Part No: WM-03
Sail Ties, 20FT Nylon from WEST MARINE Home -> Cordage -> Rigging Products
One convenient pre-packaged 20' length of soft, tubular blue nylon webbing.
Part No: WM 20 BLUE
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...		    Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...		    Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12