Top Sellers
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
Contura Rocker Switch, SPDT On/Off/On from COLE HERSEE
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
|
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 123705
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 123910
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124140
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124350
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124550
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124750
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the Foot
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124950
|
|
|
