Top Sellers
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
|
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
|
Alcohol/Electric Stove - 2-Burner from ORIGO
Safety and convenience at the dock or underway. These flush mount stoves allow you to cook with shore power when dockside or alcohol when underway. They feature electronic touch pads to control electric cooking elements. The stovetop easily flips up to allow access to remove the fuel canisters for simple filling. Fuel/Power: Alcohol/Electric Safety Features: Closed lid keeps On/Off Switch set to off. Configuration: Double Burner Cooktop Overall Dimensions: 14 7/8'' W x 6 3/8''D x 24 1/2''L .
|
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
BP8ES Spark Plug from NGK SPARK PLUGS
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6373EL
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6371EL
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6369CR
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6370CR
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6360CRN
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6353EL-B
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6365CRN
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6351EL
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6361CRN
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 510R
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 500R
|
|
|