Welcome! Please Sign-In
Top Sellers
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
5 Gallon CARB Kerosene Square Jerry Can with CRC (Blue) from MOELLER
5 Gallon CARB Kerosene Square Jerry Can with CRC (Blue) from MOELLER
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This manual covers Mercury/Mariner Outboards, all 2-stroke engines, 2. 5-275HP from 1990-2000. Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .

Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters

Remanufactured, replaces Volvo 840808-0 from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5906
Remanufactured, replaces Volvo 834976-3, 834339-4 from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5918
Remanufactured, fits 460 Ford, OMC King Cobra from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-6276
New, fits GM and Ford V8 engines, Mercury built 4 cyl. engines models 165/170/180/190/470/485/488 from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5907
Remanufactured, for GM and Ford engines with 12-3/4" dia. flywheel from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5902
New, Fits 4 cyl. (to 1991), 6 cyl. (to 1984), V8 (to 1986), for MerCruiser, OMC, Volvo, Crusader from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5911
Remanufactured, fits GM and Ford V8 engines, Mercury built 4 cyl. engines models 165/170/180/190/470/485/488 from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5901
Remanufactured, fits most 302 and 351 Fords from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5903
New, fits V6, V8 GM (1986–92), OMC King Cobra (1990–93) from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5910
New, for MerCrusier, Crusader, OMC engines with 12-3/4" dia. flywheel from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5908
Remanufactured, fits V6, V8 GM (1986–92), OMC King Cobra (1990–93) from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5905
Remanufactured, fits 4 cyl. (to 1991), 6 cyl. (to 1984), V8 (to 1986), for MerCruiser, OMC, Volvo, Crusader from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5900
New, Heavy-Duty, fits Volvo from SIERRA Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-6272
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11