|
|
Home -> Engine Systems -> Fuel Tanks
This baffled vent helps prevent water from entering the fuel tank, yet allows air to vent freely during normal sea conditions and washdowns. Eliminates the need for anti-siphon loop in the vent hose. Meets ABYC standards. Fits 5/8" ID hose, max. 9/16" hull thickness, requires 3/4" installation hole.
Part No: 1674-6
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Part No: 1684-6
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
New federal laws are prompting filling station attendants and harbormasters to call the Coast Guard on boat owners who pollute. Yet even conscientious boaters sometimes splash fuel out their vent line. Attwood's vent-line surge protector can help you avoid federal fines of up to $5,000 for small fuel spills. With automatic nozzles it shuts off the fuel flow when your tank is full. With non-automatic nozzles it gurgles when it's time to stop pumping. Fits 5/8'' ventilation hose.
Part No: 1675-6
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Black plastic vent is designed to prevent ingestion of water into fuel tank using a series of internal baffles and traps. Allows more direct routing of the hose to the tank. Requires 1 1/2'' height clearance for anti-siphon feature. Fits 5/8'' I. D. hose.
Part No: 1670-3
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
Part No: 376
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Marelon fuel-tank vent simply pushes in to a 3/4'' installation hole and automatically locks in place. Accepts 5/8'' I. D. hose. Corrosion-proof, and has no plating to chip off.
Part No: 907029
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Durable 24 gallon rotomold white topside tank. Manufactured in high density polyethylene with UV-stabilized resin. E10 Ethanol compliant. Specifically designed for use in Boston Whaler Montauk 15' and 17' consoles. Molded fill neck with side angle orientation for ease of access. Also includes 395009 twelve inch Kelch fuel cap with site gauge and vent. Can be used with 035711-10 Hold Down Strap Kit or 035710 Permanent Fuel Tank Hold Down Kit. CE Certified and both ABYC & NMMA compliant.
Part No: 031626
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 7. 87"H.
Part No: 031818
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008190
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Conversion Capsule from Mechanical to Electrical Dash Mounted Gauge 33 to 240 Ohm’s.
Part No: 035760-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes stainless steel deck fill, fuel vent, 18" fill hose, 25" vent hose, six hose clamps, vent hose barb, and stainless screws.
Part No: 035723
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008189
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034388-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Converting a gasoline tank to diesel use? You'll need a fitting that allows you to connect a fuel return line. To meet the needs of a return line found on diesel and some fuel injection engines, this design ensures all needs are met. Also includes fuel gauge float and sending unit.
Part No: 035724-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034393-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034399-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes Yamaha engine connector (Moeller 033481-10) and bayonet style tank connector (Moeller 033483-10).
Part No: 034399-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Replaces 32-80188A 2. Engine side connector (Moeller 033418-10) and tank side (Moeller 033421-10).
Part No: 034388-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034392-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034394-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie
3/8" I. D. Hose Chrysler/ Force Fuel Line Assembly Replaces OEM No.
Part No: 034393-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034391-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 033389-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034385-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.
Part No: 035711-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
Part No: 034395-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Universal fit end - 12' hose length!.
Part No: 033389-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Aluminum Permanent Fuel Tank Hold Down KitMoeller part # 035710.
Part No: 035710
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Stainless steel wire components. Custom calibration to fit reservoir configurations. Common thread size. For use on plastic tanks.
Part No: 395009
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034390-10LP
|
|
