Top Sellers
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
Electric Fuel Gauge Sending Unit, 6" to 12" from MOELLER
These sending units fit the industry-standard bolt-hole pattern and 240-33 Ohm gauges. Internal measurement components will not rust or corrode.
|
Reed Switch Sending Unit, 18-1/2" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
|
Reed Switch Sending Unit, 9" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
Quicksilver Water Eliminator from MERCURY MARINE
Quicksilver Water Eliminator removes water from your fuel tank. Just clip the unit to the fuel cap and lower into your fuel tank. The unit absorbs any water that it contacts, leaving you with dry fuel. Removing water directly from the fuel helps to prevent a number of service problems related to water contamination including corrosion, algae growth, damaged fuel injectors and carburetors, and power loss.
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035756-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035752-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035757-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035755-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035751-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035750-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035753-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035758-10
|
|
|
