Top Sellers
Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
|
4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
|
|
Home -> Engine Systems -> Motor Mounts
|
|
Home -> Engine Systems -> Motor Mounts
Simple and speedy attachment for safe and secure carrying and hoisting of engines. Made with tough, marine-grade and UV-rated materials, leave it on your motor permanently, but the buckles ensure easy removal. Self-centering handle serves as the attachment point for lanyards and hoists, or offers balanced lifting by hand. The extended strap fits most modern 2-and 4-stroke motors. Plus, a secondary ''under-strap'' provides extra security for newer engine cases.
Part No: 430
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Cargo Mate,™ the Big Brother to Motor Mate™ This heavy duty white power coated aluminum heavy lifter mounts and dismounts with ease. Winch drum capacity provides for 13 vertical feet of lift. With greater lift capacity, the unit should be thru-deck mounted on sailboats and coaming or transom/swim step mounted on power boats. 19mm) column extensions available. Lifting capacity: 250 lbs. Integral ratchet type winch provides 15 to 1 lift ratio . For both power and sail . Boom length: 34” (863.
Part No: 153200
|
|
|
|
Home -> Engine Systems -> Motor Mounts
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
Part No: 153100
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Longer reaching arms use strong, lightweight Marelon components The Nova Davit system represents the "State of the Art" for styling and function. Like all Nova products, a very high-standard finish will make the right statement about your boat. The neat folding feature stows the davit system flush with your boat's stern. The maximum safe working load is 300 lbs. Nova Davit conveniently folds inward to maintain boat slip length or remove them completely for stowage or racing.
Part No: 153302
|
|
|
|
Home -> Engine Systems -> Motor Mounts
This adjustable outboard motor bracket is designed for motors up to 10 hp or 80 lbs. Its heavy-duty, light-weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0022
|
|
|
|
Home -> Engine Systems -> Motor Mounts
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
|
|
|
|
Home -> Engine Systems -> Motor Mounts
This optional intermediate roller section extends the length of the St. Croix Roll-On System for Tenders & PWC. The entire St. Croix Personal Watercraft Roll-On System is designed for yacht owners who demand the very best in engineering, function and style. Engineered to carry up to 1000 lbs. Once the mounting hardware is installed, the system can be easily mounted or removed as needed. In just moments, without using any tools, your swim platform can be completely clear of obstructions.
Part No: 851
|
|
|
|
Home -> Engine Systems -> Motor Mounts
7" lead roller assembly.
Part No: 873
|
|
|
|
Home -> Engine Systems -> Motor Mounts
The St. This removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of non-human load. Best of all, it takes just 20 seconds to set up or remove for storage! Upper bracket attaches to a rail or a bulkhead while the lower bracket can be mounted on a deck or vertical surface.
|
|
|
|
Home -> Engine Systems -> Motor Mounts
An elegant solution to swim platform storage that is easy to install and easier to remove! The Long Bunk Roll-On System is engineered with four low-profile receivers that install permanently to the swim platform. A lead roller slides into a platform mounted shoe. ). The Long Bunk system is designed to be used on any swim platform that is at least 46½ (117 cm) deep. Removes in seconds without tools! Slide the bunks out of the receivers and slide the lead roller and winch stand out of the shoes.
Part No: 870
|
|
|
|
Home -> Engine Systems -> Motor Mounts
St. Croix Personal Watercraft Roll-On System is designed for yacht owners who demand the very best in engineering, function and style. Engineered to carry up to 1000 lbs. (454 kg), this stainless steel system can handle almost all PWCs. Once the mounting hardware is installed, the system can be easily mounted or removed as needed. In just moments, without using any tools, your swim platform can be completely clear of obstructions. Available with manual retrieval or an optional manual winch.
Part No: 850
|
|
|
|
Home -> Engine Systems -> Motor Mounts
The Euro Helm is a safe, comfortable seating arrangement for your ribbed inflatable. Euro Helm seats are ergonomiclly engineered with stainless steel, marine grade vinyl, and high-density foam. They features crisp gray stitching and accent trim plus a flip-down back and optimumized stowage underneath. EURO Helm Assembly - Model 22 Adjustable. Fits All Ribs. Complete with 16½ x 34½ Vinyl Seat & Folding Backrest. Under-seat Storage. Ergonomic Design.
Part No: 122
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Designed for small, portable boats under 250lbs. with a solid, fixed transom, these extra-wide wheels let you move your boat while avoiding contact with sharp obstacles that could puncture or scrape the bottom. Heavy-duty, spring-loaded locking system holds wheel in three positions. Constructed of lightweight, super strong graphite-filled copolymer and impervious to all outdoor elements.
Part No: WMRetrDolly1001
|
|
|
