Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

40ST Chrome ELS Winch, 43'/min.:15'/min. Line Speed; 43A:135A Draw@12V DC from LEWMAR
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.