Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.

Large Fiberglass Repair Kit from EVERCOAT
Keep onboard for use when neededUse to strengthen, repair, and rebuild fiberglass, metal, plastic, and most woods. Includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions. For use above or below the waterline. Strengthen, repair, or rebuild fiberglass, metal, plastic, and wood. Kit includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions.

Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.

Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.

Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.