Gel Coat - White, Gallon from WEST MARINE
Ideal for application of several layers, with no sanding between layers required. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Use with PVA Curing Agent (Model 593774) to achieve full cure. Waxed Gel Coat: Superior quality isophthalic finish (non-laminating) gel coat that cures to a hard, resilient and glossy surface. Superior-quality non-laminating finish gel coat cures to a hard, resilient and glossy surface. Use to touch up worn or scratched gel coat.

Resin Coloring Agent - Admiral Blue from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.

Resin Coloring Agent - Brown from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.

FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.

Large Fiberglass Repair Kit from EVERCOAT
Keep onboard for use when neededUse to strengthen, repair, and rebuild fiberglass, metal, plastic, and most woods. Includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions. For use above or below the waterline. Strengthen, repair, or rebuild fiberglass, metal, plastic, and wood. Kit includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions.

Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.