Top Sellers
Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
|
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
|
Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
|
Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.
Part No: CCC02
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Excellent for onboard repairsUse this unique UV light-activated fiberglass reinforced patch for a multitude of repairs, including cracked or leaking water lines, sanitation systems, bait tank hoses, fuel tanks and lines, antennas and many more! Simply peel away the film to expose the sticky resin, apply it to the surface needing repair and expose to sunlight. Kit contains one 3" x 6" patch. Uses UV light to catalyze the reaction. Amazing patch sticks to a wide variety of materials.
Part No: D-1006
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Excellent for creating icebox insulation Two-quart kit mixes in 1:1 ratio. Use for adding icebox or sound deadening insulation and additional flotation. Expands to 2cu. ft. or 25 times its volume. Create or add to existing flotation. Improve your ice boxes insulation.
Part No: 105612
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Small kit for fiberglass repairsRepairs small fractures and punctures in fiberglass, metal (not aluminum), and most woods. No-run polyester gel formula adheres to vertical and overhead surfaces. Kit includes 48sq. in. of fiberglass cloth, 2oz. tube of polyester resin, 1½4oz. hardener, mixing sticks, squeegee, and instructions. Won’t cure underwater or when wet, so it’s not suitable for emergency repairs. 48sq. in. fiberglass cloth.
Part No: 108050
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
This hardening agent can be used with West Marine and all other polyester fillers. White formula maintains color of filler to minimize priming. 4oz.
Part No: 101607
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Expandable foam in a convenient aerosol canThis one-component urethane foam expands and cures to a semirigid, closed-cell mass for caulking, sealing, filling and insulating. Equals 24 tubes of caulk, according to the manufacturer. Use for filling boat hull cavities, sealing electrical outlets, etc. 12oz. aerosol can. Fill cavities. Seal electrical outlets. Reduce unwanted noise and vibration. 12oz.
Part No: 100654
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Use where full cure of unwaxed (laminating) gelcoat is desiredUsed to promote full cure of unwaxed (laminating) gelcoat and polyester resin. May also be used in lieu of mold release wax when working with polyester, gelcoat or epoxy resins.
Part No: 105685
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
For above-the-water surface prep before paintingFast-drying compound fills fastener holes and gouges. Fairs up minor imperfections on bare wood or fiberglass. Sands easily. Don‘t apply over painted surfaces. Don‘t thin. Pint. Formulation: One-part above-water putty . Recommended Usage: Filling fastener holes and minor imperfections on bare surfaces . Drying: To touch: 30 min. to 1hr. ; sandable: 1 to 3 hrs.
Part No: Y257/PT
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Wood Flour For use when a hard solid for filling and filleting is required.
Part No: 25-023
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Use as a first step when varnishing mahoganyUsed to fill and permanently stain porous, loosely-grained wood. Wood should be bare, and black water stains should be bleached out. Dark mahogany. Pint. Application: Fill and stain bare wood. 50°F or higher. Colors can be mixed to customize shade . Drying: To recoat: overnight . Thinner, Model 249961: mix 2:1 filler/thinner . Coverage: One pint covers about 50 sq.
Part No: 7665-PT
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Fast-curing filler/patch agent is quick enough for emergencies, strong enough for permanent fixes!Convenient tubes of Marine-Tex for emergency and permanent repairs. Cures in one hour at 72°F. One-to-one mix. Fills cracks and voids; repairs hardware and loose fasteners. Can be drilled, tapped, and sanded. Formulation: Waterproof two-part epoxy paste . Recommended Usage: For emergency and permanent repairs to wood, steel, aluminum and fiberglass . Color: Gray.
Part No: RM320K
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
Part No: 105170
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Permanently repairs holes, gouges, cuts and rivet leaks in aluminum boats or parts. Seals leaks in tanks, pipes, joints, drains, exhaust lines, manifolds and mufflers. Repairs cracks in outboard and I/O lower units. Cures in one hour. Can be sanded, painted, drilled and tapped.
Part No: 3761475
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Fast-drying putty aids in surface preparation before application of paintFor filling pin holes, scratches and other surface defects on hulls. Easy-sanding, fast-drying, easy-spreading, and low-shrinkage. White. 21oz. tube. Formulation: One-part marine acrylic putty. Recommended Usage: Filling surface defects; colored to blend under white paint; fast drying. Color: White. White color minimizes posibility of showing through final coat. Quantity: 21oz.
Part No: 05962
|
|
|