Top Sellers
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
|
|
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 9088NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02018
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 020199
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 88602NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 88601NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 88600NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 99422NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02035
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 99420NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 99421NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 99419NA
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02039
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02044
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02022
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Wet Or Dry Sandpaper
Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest). Assortment contains two sheets 220 grit, two sheets 320 grit and one sheet 400 grit. Abrasive Material: Silicon carbide or aluminum oxide . Recommended Usage: New surfaces, burnishing old finishes or feathering fine edges . Backing Type: Paper.
Part No: 02021
|
|
|
