Welcome! Please Sign-In
Top Sellers
Shrink Wrap System Hardware Kit from DR. SHRINK
Shrink Wrap System Hardware Kit from DR. SHRINK
Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. ”Wrap-It-Up“ is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Buy it once and reuse it year after year. Buy a new kit every year.
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Guards against gum and varnish in fuelKeeps stored fuel fresh indefinitely so your engine will start easily even after being stored all winter. Prevents gum and varnish buildup and protects metal surfaces from corrosion. Use for storing up to 12 months. 8oz.
Shrinkwrap Tape, 4" x 180', Blue from DR. SHRINK
Shrinkwrap Tape, 4" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.

Home -> Paint & Maintenance -> Winterizing & Storage

K3 Keel Stand w/Top from BROWNELL BOAT STANDS Home -> Paint & Maintenance -> Winterizing & Storage
Use Brownell Keel Stands in place of conventional wood blocks. Use one keel stand for each 10,000 pounds / 4,550 kilograms of vessel weight, spaced evenly along the keel. Always use a minimum of two keel stands. Boats should be stored on a flat, even surface. On softer surfaces, a wash plate is recommended under the base of each keel stand. Use Brownell Boat Stands to stabilize the vessel. Stackable for efficient storage . Made in the U. S. A. with domestic steel.
Part No: K3
Boat Stand Keel Top from BROWNELL BOAT STANDS Home -> Paint & Maintenance -> Winterizing & Storage -> Boat Stands
Easily adjustable Acme threaded boat stand keel replacement top.
Part No: KTOP
Water Heater Bypass Winterizing Kit from CAMCO PRODUCTS Home -> Paint & Maintenance -> Winterizing & Storage
Save money by bypassing your water heater when winterizing your fresh water system Save time and money by bypassing your water heater when winterizing your freshwater system. Instead of filling your water heater with expensive antifreeze, simply isolate the heater from the rest of the system, then drain it completely of water. Quick-Turn model is permanently attached to the water heater and requires only the turn of a valve to engage.
Part No: 35983
Ripak 2000 Heat Tool from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
“Wrap-It-Up” shrink-wrap that provides your boat with 100% protection during the long off-season. Use Dr.
Part No: DS-RIPAK
Shrink Wrap Film Rack from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
Dr. Shrink’s film rack is a less expensive alternative to the heavy duty carts on the market. The side rails are made of square steel tubing measuring 18”. These rails are perfect for easy mounting on either the floor or the wall.
Part No: DS-RACK
Tideminder from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
Self-adjusting Tideminder balls protect boat and lines Protect your dock and mooring lines against fouling and chafing and eliminate the need to adjust lines during storms and tidal changes. Simply thread dock line up to 1"dia. through the Tideminder balls, secure with figure 8 knots to any size piling. The 3" x 2 3/4" balls move up and down with your boat delivering constant tension and shock absorption.
Part No: WM-TMKIT
Scoop Vent from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
Dr. Shrink's Triangular Scoop Vent 12 mil.
Part No: DS-SCOOP
Airlette Self-Adhesive Vent from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
Shrink's Round Airlette Self-Adhesive Vent.
Part No: DS-062A
Self-Piercing Louvered Vent from DR. SHRINK Home -> Paint & Maintenance -> Winterizing & Storage
Shrink's Stealth self-piercing louvered vent.
Part No: DS-STEALTH
Boat Vent II from TAYLOR Home -> Paint & Maintenance -> Winterizing & Storage
The newest in boat cover venting and support Don't let your interior suffer from mold and mildew damage. The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out!. The Boat Vent II is manufactured from a superior grade polycarbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.
Part No: 11982
Engine Winterizing Kit from WEST MARINE Home -> Paint & Maintenance -> Winterizing & Storage
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
Part No: 520411
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12