Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.

Zinc Rudder Anode - 3 3/4"dia x 1/2" thickness from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.

Zinc Anode Kit Bravo II/III, 1989-Present from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Zinc Anode Kit Alpha I from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Streamlined Collar Anode - 1"shaft x 2 1/8"dia. x 2 1/8"L from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.

Zinc Hull Anode - 6"L x 12"W x 1/2" thickness (B) from CANADA METALS
Hull Anodes Rigorously tested to ensure consistency and quality. Manufactured to OEM and MIL-SPEC specifications. NOTE: Attachment method indicated as follows: B=Bolts on. W=Welds on.