Top Sellers
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
316 Stainless-Steel Hose Clamp, 7/8" to 1-1/4", SAE Size 12 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
Washdown Fitting with Adapter from JABSCO
This unique fixture allows you to engage and disengage your wash-down hose under full pressure, eliminating the need for fiddling with a faucet. Bulkhead fitting features beefy cast stainless steel construction. Includes ABS hose adapter with 1" garden hose threads. 3/4" inlet port. 3" flange. 3 1/2"L.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704300
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704240
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704210
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704170
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704160
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704140
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704100
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704080
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704070
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704090
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704060
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704050
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704037
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704041
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704026
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704032
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704017
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704021
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704013
|
|
|
