Top Sellers
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925010
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925003
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925039
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925037
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925005
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925002
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925031
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925004
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925021
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925001
|
|
|
