Top Sellers
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
|
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesnt require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Cam Lock Snatch Blocks with Trunnions
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Cam Lock Snatch Blocks with Trunnions
The improved latch mechanism makes these snatch blocks easy to open and close even with wet, cold hands. A small lever by the opening gate operates with light finger pressure to release the gate and allow lines in and out. All stainless construction with a hardcote anodized aluminum sheave. Stainless roller bearings are easily lubricated. Sheave: Anodized aluminum. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings. Opening: Cam Lock.
Part No: RF6841
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Cam Lock Snatch Blocks with Trunnions
The improved latch mechanism makes these snatch blocks easy to open and close even with wet, cold hands. A small lever by the opening gate operates with light finger pressure to release the gate and allow lines in and out. All stainless construction with a hardcote anodized aluminum sheave. Stainless roller bearings are easily lubricated. Sheave: Anodized aluminum. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings. Opening: Cam Lock.
Part No: RF6831
|
|
|