Top Sellers
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
|
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Snatch Blocks
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6711
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Snatch Blocks
This unique snatch block, built around a one-piece forged stainless steel head, is strong and simple to operate. The block’s swivel head is set into a forged arm that swings open with the pull of a release pin. A trunnioned snap shackle allows the block to rotate on two axes for proper block and load alignment. Sheave: Plastic. Cheek Material/Finish: Soft elastomer plastic. Bearings: None. Opening: Pin and swivel arm.
Part No: 35500
|
|
|
