Small Fairlead V-Cleat, 1/8"–3/16" Rope Dia., 440lb. SWL from RONSTAN
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.
Micro Carbo-Cam Cleat Kit with 423 Cam, 329 Fairlead from HARKEN
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
Clamcleat rope cleats now need little introduction. The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope, and it will automatically cleat under load. To release, just jerk upward. With the advent of smaller and harder-core rope diameters and burn, the higher load demands the aluminum "Racing" equivalents that are now becoming the norm. Indeed, some of the smaller models' profiles have now been improved to cope even better.
Part No: C217M1
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
The 402 and 403 are fitted with a double cam for use in two-speed mainsheet systems.
Part No: 403
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
Includes cam replacement springs, ball bearings, base plate, top caps and instructions.
Part No: 150KIT
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
For high-load applications. Unique swivel design lets you set articulation range. Line diameters: 1/4"–1/2" (6–12mm). Weighs 286g (10oz.
Part No: RF60
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
Twin bearing races provide movement through either 260 degrees or 360 degrees. Ratchet-controlled rotation by adjustable-pressure screw. Kit includes C-Cleat, Fast Track fairlead, wedge kit and spring. Unique three-position arm Fits 1/4"-1/2" line and blocks from 1-1/2"-3" Working load: 660lb. Weighs 11. 25oz.
Part No: RF7
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
The purpose of Bullseyes is to re-direct lines through a smooth well rounded guide. They are moulded from high load bearing acetal resin to provide maximum resistane to wear.
Part No: R2942
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
Computer-designed flare ensures easy line entry at various angles. Die-cast aluminum with Delrin ball bearings for smooth action. Available with or without fairleads. Safe Working Load: 300lb. . Handles lines 1/4" to 7/16" dia. . Requires two #10 flat head screws. 1-1/2" centers.
Part No: 70-17
