Top Sellers
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Cleat, European Jam from WEST MARINE
Strong nylon jam cleat commonly found on most European boats.
|
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
![10" Four-Hole Open-Base Cleat, 7/8" Max. Line Dia., four 3/8" FHMS, 1-7/8"H from SCHAEFER]( "10\" Four-Hole Open-Base Cleat, 7/8\" Max. Line Dia., four 3/8\" FHMS, 1-7/8\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-10
|
|
![8" Four-Hole Open-Base Cleat, 3/4" Max. Line Dia., four 5/16" FHMS, 1-1/2"H from SCHAEFER]( "8\" Four-Hole Open-Base Cleat, 3/4\" Max. Line Dia., four 5/16\" FHMS, 1-1/2\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-08
|
|
![8" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 5/16" FHMS, 1-5/16"H from SCHAEFER]( "8\" Standard Open-Base Cleat, 5/8\" Max. Line Dia., two 5/16\" FHMS, 1-5/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-98
|
|
![6" Four-Hole Open-Base Cleat, 7/16" Max. Line Dia., four 1/4" FHMS, 1-1/4"H from SCHAEFER]( "6\" Four-Hole Open-Base Cleat, 7/16\" Max. Line Dia., four 1/4\" FHMS, 1-1/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-06
|
|
![6" Jam Cleat Open-Base Cleat, 1/2" Max. Line Dia., two 1/4" FHMS, 1"H from SCHAEFER]( "6\" Jam Cleat Open-Base Cleat, 1/2\" Max. Line Dia., two 1/4\" FHMS, 1\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-80
|
|
![6" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 1-1/8"H from SCHAEFER]( "6\" Standard Open-Base Cleat, 5/8\" Max. Line Dia., two 1/4\" FHMS, 1-1/8\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-96
|
|
![6" Standard Closed-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 3/4"H from SCHAEFER]( "6\" Standard Closed-Base Cleat, 5/8\" Max. Line Dia., two 1/4\" FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-16
|
|
![5" Jam Cleat Open-Base Cleat, 3/8" Max. Line Dia., two #12 FHMS, 13/16"H from SCHAEFER]( "5\" Jam Cleat Open-Base Cleat, 3/8\" Max. Line Dia., two #12 FHMS, 13/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-79
|
|
![5" Standard Open-Base Cleat, 1/2" Max. Line Dia., two #12 FHMS, 1-5/16"H from SCHAEFER]( "5\" Standard Open-Base Cleat, 1/2\" Max. Line Dia., two #12 FHMS, 1-5/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-95
|
|
![4" Standard Open-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 3/4"H from SCHAEFER]( "4\" Standard Open-Base Cleat, 3/8\" Max. Line Dia., two #10 FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-94
|
|
![4" Standard Closed-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 1/2"H from SCHAEFER]( "4\" Standard Closed-Base Cleat, 3/8\" Max. Line Dia., two #10 FHMS, 1/2\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-14
|
|
|
