Welcome! Please Sign-In
Top Sellers
Ring Style Car RC-125 from FORESPAR
Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
PE-1 Lexan Mast Pad Eye from FORESPAR
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.

Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Spinnaker Pole Ends

1-9/16" Spinnaker Pole End from RWO Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye. Plugs into aluminum tubes size as stated, but ribs can be filed down to accommodate thicker-walled tubes.
Part No: R4242
1-1/2" Spinnaker Pole End from RWO Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye. Plugs into aluminum tubes size as stated, but ribs can be filed down to accommodate thicker-walled tubes.
Part No: R4240
1-1/4" Spinnaker Pole End from RWO Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye. Plugs into aluminum tubes size as stated, but ribs can be filed down to accommodate thicker-walled tubes.
Part No: R4230
1" Spinnaker Pole End from RWO Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye. Plugs into aluminum tubes size as stated, but ribs can be filed down to accommodate thicker-walled tubes.
Part No: R4220
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11