Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Furling Lead Block from RONSTAN
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.
|
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3115
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3128
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3127
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3100
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Code Zero Furling
Suitable for boats up to 125 (38 m), they tame Code Zero sails, screechers, Gennakers® and staysails. The 3126, 3127, 3128 and 3115 Code Zero’s spring-loaded arms hold line captive in the sheave. Arms open to remove the line for quick unfurling, or to strike the furler. A built-in stripper safely guides line out of the furler. The lower unit incorporates a quick sail disconnect by pushing a spring-loaded button. Compact hardened steel roller thrust bearings handle extremely high luff loads.
Part No: 3101
|
|
|
