Top Sellers
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
|
|
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Billet aluminum, hard-coat anodized with Teflon impregnation.
Part No: CN34BLK4
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
These pad eyes are designed for rope shackles but can be used with steel shackles also. Large diameter radii for low rope wear. For up to 1/2" (12mm) line.
Part No: CN44BLK
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Billet aluminum, hard-coat anodized with Teflon impregnation.
Part No: CN34BLK2
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Billet aluminum, hard-coat anodized with Teflon impregnation.
Part No: CN33BLK2
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Billet aluminum, hard-coat anodized with Teflon impregnation.
Part No: CN33BLK1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
PAD EYE measures 2 2/3 inch x 2 inch with a 1 5/8 inch I. D.
Part No: 400001
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Install it on the boom of your Laser or other loose-footed dinghy sail so you can instantly attach or release sails in high winds and waves. Will not release accidentally.
Part No: 433
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
Part No: 1558
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house.
Part No: 339
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Stainless steel screw shackle for wire rope. Length: 36mm (1. 44''). Pin size: 5mm (0. 2''). Opening: 13mm (. 52''). Strap width: 13mm (.
Part No: HA4828/1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Snap shackle head adapter, stand-up base adapter and spring-loaded 1" track slide with head adapter fit most competitors’ like products.
Part No: RF6170
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Cast aluminum halyard shackle with a captive stainless steel pin. A strong lightweight solution for mainsails with headboards. Double-threaded pin prevents loss. For halyards up to 1/2'' diameter. Pin diameter: 1/2'' Length Overall: 3'' Inside Length: 1 1/32" Inside Width: 5/8'' Uniformly distributed breaking load: 4,410lb Safe Working Load: 2,000lb.
Part No: RF6600
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Includes an integral height adjustment block with ball bearing sheave. Weighs 2. 5oz.
Part No: RF17
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Grade 316 stainless steel .
Part No: RF5271
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Molded nylon trapeze handle has a contoured safety grip and a wire guide to prevent hand contact with wire. Blue.
Part No: PNP171BLU
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
1/4" Internal thread .
Part No: RF5290
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Complete set with line for 16" height adjustment and 2:1 purchase. Includes 5-1/4" x 3-1/4" hoist ring with nova plain block, adjustable jamming block with a 1"dia.
Part No: R4170
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Strengthened universal attachment below handle allows connection to a variety of hoist gear.
Part No: R4110
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Carbine hooks in 316 stainless steel complete with rope grommet. Four popular sizes in 5 to 10mm diameter. Ideal for mooring lines or when any quick attachment or release is required.
Part No: R7430
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
O-Ring Kit - J Hook.
Part No: 669992
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Great for snatch blocks, snap shackles, zippers, quick pins, etc.
Part No: 99-23
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Made of stamped 304 stainless steel. Useful as a lifting eye or in mooring applications. 3-3/16"L x 1-15/16"W; hole centers 2-9/16"L x 1-5/16"W. Ring ID: 1-3/4".
Part No: 089613
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
"U" Bolt - Stainless Steel Pad Eye.
Part No: 080033-1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Chrome-plated eye. Zinc-plated steel bolts, nuts and washers. Shank length: 4-5/8". Stock dia. : 3/8".
Part No: 079135
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Die cast chrome zinc with galvanized shaft. 3/8" dia. x 3 1/16"L. 5 1/8"L overall. 15/16" ID eye. . Includes nut and washer. . Imported. . Model 079133-1.
Part No: 079133-1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Investment Cast 316 Stainless Body.
Part No: 147060-1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Wire Rope Clip Investment Cast 316 Stainless Body/AISI 304 Stainless U-Bolt. Accepts 1/4" wire size. Length: 1-1/4". Overall width: 1-1/16".
Part No: 159506
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Injection-molded nylon. May be used for hanging gear or light webbing assemblies. Not suitable for use in heavily loaded or safety applications. Stock: 3/16"dia.
Part No: PNP52C
|
|
|
