Top Sellers
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
|
|
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
.
Part No: 352005
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Description: High-beam . Length: 11' 9-3/4" . Hole spacing: Slide Bolt . Weight: 402oz. . Fasteners: 5/16" HH . Endstop/trim cap: 562 / 3158 .
Part No: 3156.3.6M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Makes it simple to reduce sail. Harken has simplified the single line mainsail reefing kit developed from Garry Hoyt’s patented concept making this kit lighter and easier to install. A must for single handers or shorthanded sailing. Reefing with the kit is simple: ease the halyard to a predetermined mark, tension the reefing line, and re-trim the sail. For boats to 27'. Everything you need for installation is included except the line, a cleat and stopper. Ideal for boats from 22' to 27' (6.
Part No: 430
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Kit includes two endcaps, screws, blue loctite and instructions.
Part No: HMR3
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
For everything that rolls! Only one drop of this new conditioner will repel salt, dirt and other deposits to protect, lubricate and condition the bearing surfaces. Reduced friction allows balls to roll freely and evenly, greatly improving traveler or battcar performance. 0.
Part No: 7875
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Midrange Car Loader.
Part No: HMR2
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Lightweight Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Part No: RC72540
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
"T" Track Slide has block head adapter with spring for conversion of any Ronstan Series 40 and 50 blocks for track use. Fits 1" T-Track. Loaded track stop. Stainless steel with low-friction liners.
Part No: RC72539
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems.
Part No: RF9004-09
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Tough plastic inserts help Ronstan genoa slides keep the car from scarring the track, while making it easier to move the car. Replacement low friction liners for 1" or 1-1/4" track slides . Black .
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems.
Part No: RC00030
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Fits Series 25mm Track Low profile Lightweight plastic.
Part No: RC72581
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
High-strength anodized aluminum alloy toe rail has a silver finish. 34'L x 2-3/4"H x 1-1/2"W. Complete lengths only. Uses 1/4" screws (sold separately).
Part No: A62-0009VEL34D
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Based on the same principal as the friction brakes that mountaineers use to control their descent during a rappel, this simple device offers an easy way to tame otherwise dangerous gybes. It safely controls the speed of the boom’s motion during a gybe, and also locks the boom in one position. The Boom Brake has three settings to adjust the friction on the line that passes through the device. Configurations of one, two, or three wraps are possible to accommodate different degrees of load. ft.
Part No: 07150
|
|
|
