Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

Folding Anchor Ball from PLASTIMO
The internationally recognized signal for a boat at anchor, this black ball is 11-7/8" in diameter, made of PVC, weighs just 1 pound and folds flat for storage.

Anchor Deck Chocks from PERKO
Polished, chrome-plated bronze chocks hold small, pivoting fluke anchors. Fit Danforth anchors to 16lb. and Fortress Anchors to 10lb. (FX-16). Four-piece set includes supports for shank, flukes and crown.

44lb. (20kg) Anchor, 30'-46' (9-14m) Boat Length, 34.1"L x 17.3"W x 14.88"H from ROCNA ANCHORS
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .

88lb. (40kg) Anchor, 46'-72' (14-22m) Boat Length, 44.96"L x 22.44"W x 19.76"H from ROCNA ANCHORS
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .

Slide Anchor Samll Box Anchor, Stainless Steel from SLIDE ANCHOR
It's simply the best and easiest anchor you'll ever buy! A state-of-the-art anchoring system for boats of all sizes and types. Requires No lead chain and half the anchor line of conventional anchors. Sets quickly in almost any bottom condition, retrieves easily and Folds flat for storage. Folds down flat for compact storage.

Slide Anchor Large Box Anchor, Stainless Steel from SLIDE ANCHOR
It's simply the best and easiest anchor you'll ever buy! A state-of-the-art anchoring system for boats of all sizes and types. Requires No lead chain and half the anchor line of conventional anchors. Sets quickly in almost any bottom condition, retrieves easily and Folds flat for storage. Folds down flat for compact storage.

Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.

Anchor Puller Ring from IRONWOOD PACIFIC
stainless ring used in our Anchor Float is available for those who wish to splice their own system together from components they already own.

Anchor Retrieving System from T-H MARINE
Easy to use, maintenance free, and much cheaper than a windlass! Simply place the anchor ring over your anchor line, attach the anchor ball, lower the ball overboard, and run a slow course 30-45 degrees away from the anchor. This will move the ball down the anchor line to the anchor, pulling it free, and floating it to the surface. Complete Kit Includes: Red 12" Dia. A-1 ball Stainless Steel Anchor ring 3/8" Dia. Nylon Line with stainless snap For boats up to 40' Made in U. S. A.

Water Spike Anchor, 22'-35' from MARINETECH PRODUCTS
WaterSpike will hold tightly on the lake bottom and release just as easy. The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. For boats 22-35 feet. . Incredibly light weight. Only 16lbs! . Unmatched holding power in hard or soft bottoms. . Unique Sliding Ring design guarantees release everytime. . Completely collapsible for easy storage.

Medium Platform Bow Anchor Roller, 3-3/8" Width; 3/8" (4) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Danforth S1600 Anchor - For Boats 36-40', 23lbs., 1,600lb. Safe Working Load from DANFORTH
Every angle on a Danforth anchor contributes to its performance. A 32 degree shank angle is assured, as the shank comes to a rest on reinforcing yokes inside the angled crown plates. The inward sloping crown forces its thin, sharp flukes into the bottom, while the I-beam fluke construction provides extra safety with its strength and durability. Excellent holding in sand or sand/mud bottoms, but limited or no holding in grassy, rocky, or clay bottoms. Stows Flat .

Danforth Hi-Tensile Anchor - 20 lb for 30-36' Boats, 2,500 lb SWL from TIEDOWN ENGINEERING
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.