Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.

Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .

Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.

Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.

Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.

Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.

Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.

FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.

Wood Putty - Mahogany , 6 OZ from FAMOWOOD
A quick and easy way to fill nicks and scratches in woodReal wood in a plastic base. Perfect for filling nicks and scratches in virtually any wood. Dries fast, sands easily and can be painted over. Dries fast.

Flag Epoxy Repair Kit from MAS EPOXY
For small repairs and bonding; Perfect where only a small amount is needed. Small enough to keep on board, but enough epoxy to make most quick repairs! Kit includes: 16oz. Flag Epoxy Resin. 8oz. medium hardener. 10 mixing sticks. 4pr. gloves.

G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .

Large Fiberglass Repair Kit from EVERCOAT
Keep onboard for use when neededUse to strengthen, repair, and rebuild fiberglass, metal, plastic, and most woods. Includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions. For use above or below the waterline. Strengthen, repair, or rebuild fiberglass, metal, plastic, and wood. Kit includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions.

Resin Coloring Agent - Admiral Blue from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.