Top Sellers
Self-Bonding Rigging Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
7 x 19 Flexible Wire, 1/16" Wire Dia., 480lb. Breaking Strength from LOOS And CO., INC./C
Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire’s tendency to collect carbon particles and become brittle. Exceptionally strong Loos wire rope is available in several different configurations and materials. 7 x 19 Flexible Wire Strong, medium flexibility cable commonly used for wire halyards. Seven strands of 19 wires each. Standard pack is a 250' spool.
|
Regular Tension Gauge for 3/32"–5/32" Wire Diameter from LOOS
Make accurate and quick adjustments to wire rigging. Tension reads in pounds. Anodized aluminum.
|
Quick Release Shroud Lever - Large from JOHNSON, C.S.
Permit easy rigging adjustments, and allow masts to be stepped and un-stepped easily. The lever is easy to open and close under load . Has a quick release pin for security. Working load Small: 500lb.
|
Backstay Insulator, 3/16 IN Wire from RONSTAN
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
|
Windex Wind Vane Light - Model 3200 from DAVIS INSTRUMENTS
Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials .
|
Sail Gasket, 12" from WEST MARINE
No need to untie wet knotsDual lengths of 3/16" shock cord secured at each end with red plastic ball and stainless hog ring make securing the mainsail to the boom a snap! Much quicker than conventional sail ties.
|
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
Dacron Sail Repair Tape, 3" x 15' from AQUABATTEN
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Uni-Fid for Splicing Braid from NEW ENGLAND ROPES
Two sizes make for neater, smoother splices. One fid is for 1/4"–3/8" line; the other is for 7/16" and larger line. Packed in a plastic storage tube.
|
Spreader Boot, Small (2) from WEST MARINE
New! West Marine Spreader Boots Protect your sails from ripping and tearing with these soft injection-molded UV resistant synthetic rubber spreader boots. Fits quickly and easily over the stay and spreader ends. Design Features: Smaller frontal area for less wind resistance. Greater surface area on end reduces sail tears. UV synthetic rubber to withstand harsh marine environments. Dimensions: Small: Fits spreader tips up to 1-1/2" x 1/2" - Shrouds up to 1/8".
|
3/16" Dia. Shock Cord, 150' Std. Pk. (sold per foot), Red from SEAFIT
Bright red and blue polypropylene covers look great and provide UV-protection.
|
|
Home -> Sailboat -> Rigging Products -> Rigging
|