G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.

Tiller Tamer from DAVIS INSTRUMENTS
Smooth, adjustable control of tiller movement, for short periods of "self-steering. " Particularly useful when changing sails, motoring, etc. on short-handed boats.

Tiller Lock Box from FORESPAR
Holds any ball-grip adjustable tiller extension in place for short periods of self-steering. Adjustments are made by adjusting your tiller extension length.

36" Giant Stick Tiller Extension, Speed-Lock Fitting from FORESPAR
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.

Fastac Tiller Extension, 24" - R0831 from RWO USA/WEATHERMARK
All black 5/8" (16mm) aluminum tubes with smart black Omniflex end fittings. Omniflex is a universal joint of opaque elastomeric polymer with a fiber core.

Pedestal Steering Brake from EDSON CORPORATION
Especially handy on long runs or when operating under power, this brake can secure the wheel under most conditions and will hold the boat on course while the helmsman trims a sheet or goes below. The brake can always be overridden by the helmsman. Constructed of bronze with long-lasting linings, includes a stainless shaft and brake knob. For safety, the handle is designed to pop off if a line is tangled around it. Pre-drilled holes allow installation in about 20 minutes.

Control Handle - Throttle 963SB-55 from EDSON CORPORATION
Highly polished, investment cast stainless steel, marked "Fast-Slow" and "Fwd-Rev". Designed to fit Edson Dual Lever Engine Controls.

Stainless Snap Shackle, 2200lb. MWL, 7/16" / 3/4" Min./Max. Line Dia. from RONSTAN
Economy shackles for use where you don’t need them to swivel. Stainless models are 15-5PH. Bronze models are forged with stainless pins. NOTE: Functional load is the point at which snap shackles distort beyond usability but before they break.

Fastpin, 3/16IN D X 1/2IN SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.

QRH Spreader Bar Frame from RWO
If a trapeze boat capsizes and turtles and the crew is clipped onto the wire, the new QRH hook can be released with a simple pushbutton, freeing the trapped sailor. Created in response to fatal accidents, the QRH system has been tested for three years by experts, racers, and sailing beginners under all racing condtions. Quick-release harness systems will be required equipment under the Racing Rules of Sailing beginning in 2006. Made from all stainless steel. Fits 1 1/2" webbing. .

Chain Plate, 1-1/2"W x 14"L, 1/2" Hole Diameter from SCHAEFER
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.

Cotter & Clevis Fastener Kit from WEST MARINE
A 66-piece assortment of cotter rings ranging from 3/8" to 7/8" diameter to fit clevis pins from 3/16" to 3/8"; cotter pins from 1/16" x 3/4" to 1/8" x 1-1/2"; and clevis pins from 3/16" x 3/4" to 3/8" x 1".

Standard Sea Rail Bag from GUL USA INC
Keep gear, sheets or docklines from cluttering your cockpit by stowing them out of the way in these rail bags. Durable, UV-protected nylon sheet bags feature a stainless-steel fastener and hook system that snaps onto lifelines easily and can be removed for storage. The sides of each bag cinch in with bungee to keep gear contained. The Deluxe model has two inside pockets, a stowable rain cover, and an outer mesh pocket for easy access.

Cunningham Hook, 5/16IN D 4L from SEAFIT HARDWARE
Stainless steel, with wide flare and parallel eye.