1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.

Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.

Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.

Single Line Mainsail Reef Kit from HARKEN
Makes it simple to reduce sail. Harken has simplified the single line mainsail reefing kit developed from Garry Hoyt’s patented concept making this kit lighter and easier to install. A must for single handers or shorthanded sailing. Reefing with the kit is simple: ease the halyard to a predetermined mark, tension the reefing line, and re-trim the sail. For boats to 27'. Everything you need for installation is included except the line, a cleat and stopper. Ideal for boats from 22' to 27' (6.

5/8" Stainless-Steel Sail Track Stop from SCHAEFER
Stainless-steel end stops protect your sails.

Downhaul Hook, 2 3/4IN L, 5/16Dia. from SEAFIT HARDWARE
Stainless steel hook with closed perpendicular eye.

Series 60 Ratchet Block, Head Post Locking Kit from RONSTAN
Great for dinghy mainsheets on boats such as the Laser, 470 and 49er. Spinnaker sheets on dinghies, especially modern asymmetric classes, sportboat mainsheet systems, vang, traveller and control lines on larger boats. Pivoting lead blocks are great for sportboats and small keelboat spinnaker sheets and other control line applications on larger boats. One of the switches can be removed if desired. Ball Bearings: Carbon Black Acetal, Torlon® ratchet pawl . Sheave Size: 2-3/8" (60mm) .

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Micro Carbo-Cam Cleat Kit with 423 Cam, 329 Fairlead from HARKEN
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .

5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.

Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.