Replqacement Torlon Balls (25) from HARKEN
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.

Genoa Track Slide, Fits 1-1/4" T-Track from RONSTAN
Ronstan’s stainless steel slides come with tough plastic inserts which keep the car from scarring the track, while making it easier to move the car. Spring-loaded adjustment pins for fast, positive positioning . Semicircular bails . Slides for 1" track are typically used on boats to 26' . Slides for 1-1/4" track are typically used on boats to 40' .

Hullkote High-Performance Speed Polish from MCLUBE DRY LUBRICANT
Hullkote combines the same very fast world renowned McLube proprietary formulation of our bonded PTFE suspension system with an entirely revolutionary citrus-based long lasting high gloss polish. Citrus based natural degreaser and polish creates an ultra-smooth, well sealed finish with an excellent and long-lasting high gloss shine. Provides superior UV protection for your hull and spars from the damaging rays of the sun. Keeps your hull cleaner, much longer than anything else available today.

Single Line Mainsail Reef Kit from HARKEN
Makes it simple to reduce sail. Harken has simplified the single line mainsail reefing kit developed from Garry Hoyt’s patented concept making this kit lighter and easier to install. A must for single handers or shorthanded sailing. Reefing with the kit is simple: ease the halyard to a predetermined mark, tension the reefing line, and re-trim the sail. For boats to 27'. Everything you need for installation is included except the line, a cleat and stopper. Ideal for boats from 22' to 27' (6.

Reef-LOK 3/8IND 4L from SEAFIT HARDWARE
Bolts to the gooseneck or boom. The only piece of hardware needed for the tack reef point.

Medium Boat Length 27"–37", Boom Min. 10'6", Boom Max. 16'0" from HARKEN
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.

Replacement Bulb for Windex Light, Model 3201 from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.

Snap Shackle, Fits Size 50mm, 15mm Opening Eye ID, Replaces 4mm Pin Dia., 990lb. SWL from LEWMAR
Replaces the standard shackle fitted to all blocks Will also fit all Lewmar Ocean blocks and most other blocks of similar size .

Stainless Snap Shackle, 2200lb. MWL, 7/16" / 3/4" Min./Max. Line Dia. from RONSTAN
Economy shackles for use where you don’t need them to swivel. Stainless models are 15-5PH. Bronze models are forged with stainless pins. NOTE: Functional load is the point at which snap shackles distort beyond usability but before they break.

Replacement Sailboat Tackle Storage Bag from LIFESLING
Replacement storage bags for the 3:1 (Model 561100) Lifesling hoisting tackle for sailboats.

Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

ACTU Engine Throttle Control from SPINLOCK
Run the engine in neutral simply by pushing the handle inward, which disengages the clutch Return the handle to the minimum throttle position, and it smoothly re-engages. The ATCU/1 Faceplate is designed to fit Teleflex model B700, CH2100P and CH2600P engine controls. It replaces the standard faceplate and handle provided with those controls, adapting them for use on a sailboat with removable winch handle throttle control. No risk of line snags when sailing or under power. Deters boat theft.

Small Screw-On Plastic Shackles from BAINBRIDGE INTERNATI
Bainbridge International's plastic shackles are designed for ease of use, high strength and ability to absorb shock loads. The screw design is strongest and permits easy detachment and re-attachment .

Double 6' & 3' Tether, Snap Shackle Chest End, Double-Action Hook Boat End from WEST MARINE
Is your safety tether still safe? This tether will tell you Meeting all ISAF (International Sailing Federation) requirements for strength, design and features for sailboat racing, these safety tethers incorporate a lightweight aluminum double-action safety hook and a built-in stress indicator for improved security offshore, whether racing or cruising. The stress indicator features a bright overload flag that is exposed when the tether is stressed to the point of needing replacement (about 900lb.