Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.

Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.

5/8" Stainless-Steel Sail Track Stop from SCHAEFER
Stainless-steel end stops protect your sails.

1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.

5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.

V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
Eye straps are convenient for lashing points and attaching control line leads or blocks.

Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.

Wincher, 2.25IN TO 2.75IN from WATSKI
Winchers are rubber disks that fit over the top of your non-self-tailing winches to make them perform like self-tailers. Loading up the winch drums until the line contacts the underside of the Wincher creates friction which allows the line to self-tail. A rope groove holds line reasonably securely around the top of the winch. Practical Sailor Magazine suggests Winchers for halyard winches, but not sheet winches, although we have many comments from customers who swear by them.

2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.

Ripstop Nylon Tape, Black from BAINBRIDGE INTERNATI
Fix sail tears with this high-strength nylon tape High-strength nylon. Adhesive-backed.

3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .