Welcome! Please Sign-In
Top Sellers
Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Easy On Bottom Coating from OCEAN ACCESSORIES LL
Easy On Bottom Coating from OCEAN ACCESSORIES LL
Why paint when you can wax? If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Recommended Usage: Fresh or intermittent salt water use; lasts one full season . Clear, nontoxic alternative to bottom paints . Coverage: One pint covers 24' hull . Drying Time: Dries in minutes, overnight curing before launch .
U-1001C Top Coat Spray Catalyst - Gallon from STERLING
U-1001C Top Coat Spray Catalyst - Gallon from STERLING
Spray catalyst for gloss topcoats.
Teak Sealer/Dressing - Quart from TEAK WONDER
Teak Sealer/Dressing - Quart from TEAK WONDER
Restores and protects the splendid beauty of teakTwo-part system cleans away dirt and black discoloration and restores teak to a lustrous hue. Won't affect paint, varnish or metal surfaces. Follow up with Sealer/Dressing Step one loosens dirt and mildew. Step two neutralizes step one. Rinsing reveals the bright natural beauty of the wood.
Inflatable Boat Antifouling Paint from PETTIT
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
Algae and Waterline Stain Remover from CAPTAIN JOHN S BOAT
Algae and Waterline Stain Remover from CAPTAIN JOHN S BOAT
Works quickly on stubborn algae and waterline stainsEasy spray-and-wipe application makes short work of a dirty chore. Meets EPA National Clean Marina guidelines. 22oz.
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.
Bird and Spider Dropping Stain Remover from CAPTAIN JOHN S BOAT
Bird and Spider Dropping Stain Remover from CAPTAIN JOHN S BOAT
Quickly and safely removes stubborn fecal stainsRemoves stains that result from bird, and in certain locals, spider droppings. Safe for all surfaces. Meets EPA National Clean Marina guidelines. 22oz.
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
Cetol Marine Gloss Overcoat, Quart from SIKKENS
Cetol Marine Gloss Overcoat, Quart from SIKKENS
Bring out wood’s natural shine! Enhances and protects the natural beauty of interior and exterior wood. Semi-transparent finish prevents weathering and repels water. Easy to use—just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Apply by brush only—no sanding required. A fine orange-brown translucent finish is left—use alone or with Cetol overcoat. Coverage: 85 sq. Recommended Usage: Exterior and interior, above water .
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .

1015 Captain's Varnish, Z-Spar Coatings 1015 Captain's Varnish

Captain's Varnish - Quart from Z-SPAR COATINGS Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-QT
Captain's Varnish - Gallon from Z-SPAR COATINGS Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-GA
Captain's Varnish - Pint from Z-SPAR COATINGS Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-PT
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12