Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .

Fast Cure 5200 Sealant - White, 3 OZ from 3M PRODUCTS
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .

Drain Fitting, 1-1/4" Straight, 3/4" Hose, Plastic. from FORESPAR
1-1/4" Straight, 3/4" Hose, Plastic.

Magnetic Clasp, 40#, 1 1/4" x 1 1/8" x 1 1/4" from TACO PRODUCTS
Stainless Steel Magnetic Clasps for 3/4" thick surfaces.

Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.

Scotch-Brite Surface Roloc Disc - 3", Coarse, 50Pk from 3M PRODUCTS
Cleaning and surface preparation 3" Coarse.

Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.

High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.

Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.

5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

Doodlebug Scrubbing Pad - Fine (White) from 3M PRODUCTS
Ideal for cleaning and scrubbing practically everything aboard. For cleaning and scrubbing virtually anything onboard .