Top Sellers
4811 Extended Service Tape - White, 2" from 3M PRODUCTS
For extended outdoor useSeals plastic sheeting, tarps and shrinkwrap. Resists temperature extremes, lubricants and coatings. Easy removal for up to two years. Recommended Usage: Boat storage and shrinkwrap, over-the road transport . Material: Polyethylene back, pressure sensitive adhesive . Removal Time: Black tape: two years; White tape: one year.
|
Low-Friction Rigging Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Self-Bonding Rigging Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
3M Imperial Compound - Quart from 3M PRODUCTS
Removes sanding scratches—for machine applicationAn exceptionally fast-cutting liquid compound and finishing material designed to remove sanding scratches. Leaves an excellent finish without swirl marks. Use with a compound pad.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
5200 Polyurethane Adhesive/Sealant, Black, 10oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
Fast Cure 4200 Polyurethane/Adhesive Sealant - White, 10 OZ from 3M PRODUCTS
Cures fast and forms a watertight seal between joints and hardwareOne-part, all-purpose sealant chemically reacts with moisture and forms flexible, watertight, weather-resistant seals on joints and hardware. Can be used above or below the waterline; approximately half the strength of 3M’s 5200, which allows for eventual dissasembly of parts. Note: Can be softened by some teak cleaners and sealers and is not recommended for sealing teak decks. Cure Time: Tack free: 2 hrs; complete cure: 24 hrs.
|
Mildew Stain Remover from 3M PRODUCTS
Easily removes mildew stains from vinyl, headliners, covers, and other marine surfaces. Use 3M Marine Mildew Block to help prevent mildew growth 16.
|
5200 Polyurethane Adhesive/Sealant, White, 10oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
Fast Cure 4200 Polyurethane/Adhesive Sealant - Black, 10 OZ from 3M PRODUCTS
Cures fast and forms a watertight seal between joints and hardwareOne-part, all-purpose sealant chemically reacts with moisture and forms flexible, watertight, weather-resistant seals on joints and hardware. Can be used above or below the waterline; approximately half the strength of 3M’s 5200, which allows for eventual dissasembly of parts. Note: Can be softened by some teak cleaners and sealers and is not recommended for sealing teak decks. Cure Time: Tack free: 2 hrs; complete cure: 24 hrs.
|
Fast Cure 4200 Polyurethane Adhesive/Sealant - White, 3 OZ from 3M PRODUCTS
Cures fast and forms a watertight seal between joints and hardwareOne-part, all-purpose sealant chemically reacts with moisture and forms flexible, watertight, weather-resistant seals on joints and hardware. Can be used above or below the waterline; approximately half the strength of 3M’s 5200, which allows for eventual dissasembly of parts. Note: Can be softened by some teak cleaners and sealers and is not recommended for sealing teak decks. Cure Time: Tack free: 2 hrs; complete cure: 24 hrs.
|
Perfect-It™ 3000 Extra Cut Rubbing Compound from 3M PRODUCTS
Provides a superior cut while leaving a fine swirl mark finish on all modern paint systems! This new formulation will remove P1200 and finer sand scratches while providing excellent handling characteristics with easy clean up.
|
Dual Lock™ Reclosable Fastener System from 3M PRODUCTS
3M™ Dual Lock™ Reclosable Fasteners have been used extensively in transportation, electronics, business equipment, machinery, medical and sign and display markets. When the mushroom-shaped stems interlock, tensile strength is high enough to replace mechanical fasteners in many applications, yet you can readily open and close Dual Lock fasteners hundreds of times. 1"W x 1'L. Clear, polypropylene reclosable fastener with a VHB™ Tape pressure-sensitive 250 stems per square inch.
|
|
3m products back up pads
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05568
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05756
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05576
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05876
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05775
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05779
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05755
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05768
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05579
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05776
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Hard rubber back-up for use with Roloc Discs. . Complete with a 2'' x 1/4'' steel shank.
Part No: 05539
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Hard rubber back-up for use with Roloc Discs. . Complete with a 2'' x 1/4'' steel shank.
Part No: 05540
|
|